Can A Router Be Used As A Wireless Adapter

Associate
Joined
25 Mar 2006
Posts
1,169
Location
Thornbury
i have a spare d-link modem / router DSL-604T, can i use this on an upstairs pc to wirelessly connect to my sky modem downstairs:)

im not very clued up on networking stuff so i thought i would ask rather than just go and buy one;)
 
the router MIGHT function as a Wireless AP - check the router's control panel/documentation.

it's unlikely though. you best bet is just to buy one.
 
You'd need it to work as a wireless client. If you've got it, it'll say in its web interface...

Firewall protection, DMZ port, routing, DHCP support, NAT support, Stateful Packet Inspection (SPI), manageable, VPN passthrough


does not look like it :(
can i use it as a switch then as it supposts transparent bridging. one of the rooms has an xbox 360 with a belkin access point/ extender, so could i connect the pc and xbox 360 to the d-link router and then connect the router to the belkin access point,, im hoping this might let give the xbox and the pc an internet connection.
 
If it does support it - most don't have the functionality in the web management - you'd have to enable telnet/console access and know the commands needed to setup - each router chipset has a different shell/CLI running beneath it so you'd need instructions for that exact model.
 
If it does support it - most don't have the functionality in the web management - you'd have to enable telnet/console access and know the commands needed to setup - each router chipset has a different shell/CLI running beneath it so you'd need instructions for that exact model.

im afraid that over my head, ill just get another wireless adapter thanks anyway dude ;)
 
Can I ask if this only covers if you want the second router to connect wireless to the first router?

I was just wondering if you connected two wireless routers together via Cat5e etc can the second router be used as an access point?

I've got around 5 wireless routers here which I'd like to connect up and extend the wireless around my ranch.
 
Yes, it only needs to work as a wireless client if you're going to use it as such. Using cables to hook the routers together is infinitely more simple, so long as you disable DHCP et al on all but one.
 
Back
Top Bottom