can i push it more

[LabR@t]

have 3200 winnie running like this

250fsb x 4HTTx 10 = 2500 vcore 1.525
can get post at 2600 what can i do to get to stable at 2600mhz

 

[Raikiri]

Try lowering the HTT to 3x, increasing the chipset voltage by 0.1v and lowering the ram speed (166 if it is 200, 133 if 166)

 

[LabR@t]

if i lower to 133 , and manage 2600 wont the ram be running way under 200mhz, and limit the gains i made from oc'ing??

 

[Raikiri]

Mmeory speed makes very little diference for athlon 64s, the only thing that might get worse is your super pi results.

You could just try pushing it and make sure the ram can take the higher speeds, or increase the rams timings to allow for a higher clock

 

[Yucca]

Can i ask what board you are running as i am in almost the exact same position.

 

[Tens]

tis around the highest i seen 3200's on air.

 

[Raikiri]

tis around the highest i seen 3200's on air.

I have seen some do 3ghz, mine is 2.5ghz right now but it is a rubbish stepping

 

[Yucca]

I can get mine to 2500 np but getting to 2600 requires a lot of messing.