Associate
- Joined
- 29 Sep 2003
- Posts
- 593
- Location
- Stoke-on-Trent
So i built this system 4 years ago with the intention of overclocking it but didn't ever get around to it until now. Recently bought and fitted my first ssd which in turn meant giving the system a clean out (both physically and software wise) which in turn gave me the urge to finally get around to doing some tinkering.
The last system i overclocked was the one before last, a P4 northwood 2.4Ghz, so that should give you all a clue to how long it has been since i last did any overclocking
.
So,with that being said, would someone mind looking these numbers for me and let me know if it looks ok before i start properly stressing it. Thanks.
(Not too sure what the value at "i5 2500k-Voltages-VID" is. I set vcore to 1.3 as can bee seen under the mobo part)
Screenie taken after a little bit of Realbench hence the temps.
The last system i overclocked was the one before last, a P4 northwood 2.4Ghz, so that should give you all a clue to how long it has been since i last did any overclocking
.So,with that being said, would someone mind looking these numbers for me and let me know if it looks ok before i start properly stressing it. Thanks.
(Not too sure what the value at "i5 2500k-Voltages-VID" is. I set vcore to 1.3 as can bee seen under the mobo part)
Screenie taken after a little bit of Realbench hence the temps.
Last edited:
