Candeo zigbee dimmer

Robert

Robert

Robert

Soldato
Joined
20 Oct 2002
Posts
16,095
Location
North West
I have two side lights controlled by one switch. They’re 6.5 watt led bulbs and due to size of fitting they’re non smart.

I installed the candeo switch but had issues with flickering and that they wouldn’t power off properly. I bought the candeo led bridge, but can’t seem to get it to work - assume user error. Here are some pic’s - though I’ve also had the response from candeo below:

ibb.co

IMG-1204 hosted at ImgBB

Image IMG-1204 hosted in ImgBB
ibb.co ibb.co

Hi Robert,



Many thanks for purchasing of our zigbee dimmers.



The bypass needs to bridge the neutral and live, so it is unlikely that you can fit this at the switch. You will need to fit it in the ceiling rose, or across the first LED.



As a reminder, if you are in any doubt whatsoever, I would strongly recommend that you ask a qualified electrician to carry out the work.



Regards
Click to expand...
 
Assume I can tape the wire up? No, no neutral. There was a black and red cable. The black cable had red tape on it. this is the first time I’ve opened it since moving in eight years ago.

House was built in the 60s.
 
Last edited:
So turned out my bulbs were not dimmable, so bought two new. Will try and report back. What’s best to trim the copper?
 
You must log in or register to reply here.
Back
Top Bottom