Cant access routers interface page (in AP mode)

Soogs

Soogs

Soogs

Soldato
Joined
11 Jun 2003
Posts
7,613
Location
The Shadows (london)
So I've got a bit of a complicated setup and everything is still working but I've lost access to the dlink router in access point mode (lan/internet all working ok)

WAN/EDGEROUTER X CONFIG (load balanced)
IPS1 --> EDGEROUTER (WAN1/ETH0)
ISP2 --> CONNECTIFY --> EDGEROUTER (WAN2/ETH1)

EDGE ROUTER
ETH2 --> DLING DWR953 (IN AP MODE) --> GL.INET SLATE (VPN)
ETH3 --> SWITCH 1
ETH4 --> SWITCH 2

i cant find the ip address of the dlink router

i can see the gl.inet slate from the edge router but not the dlink which is in the middle of the 2.

what am i doing wrong here?
 
so looking at the dns of the gl.inet router the dlink address should still be 192.168.0.1 but is not reachable from any router/device and us still not assigned an ap from the edge router
 
edgerouter 192.168.1.1 (reachable)
modem 1 192.168.2.1 (reachable)
modem 2 192.168.3.1 (reachable)
ap router 192.168.0.1 (cant reach any more, but was reachable until it was rebooted)
 
Set a static IP on PC of 192.168.0.100
Connect to the AP and change its management IP to a suitable 192.168.1.n address
Restore the original network settings on the PC
 
You must log in or register to reply here.
Back
Top Bottom