• Notice regarding image hosts and attachments. See here.

Cant Boot

Associate
Joined
22 Jan 2005
Posts
1,267
Location
Australia
Just rebuilt my pc into an Antec 300.

Turned it on and the fans spun for a second then nothing. Tried again, fans didn't even spin up.

As this has happened to me before i moved some power cables away from the case to stop any shorting. Nothing.

Took mobo out the case and disconnected everything except power, cpu and 1 stick of ram. Same thing happens. If the 4 pin CPU cable is in it wont even turn on. If its out the fans spin up for half a second. Took cpu out and it turns on and the PSU fan spins normally. Tried 2 different stock Intel coolers and neither made any difference.

The mobo cant be shorting out on anything as its on a mobo box.

E4300
P5NE SLI
4gigs geil and ocz
600w stealxstream ocz


Any suggestions?

Cheers
 
Ok an update.

I've now replaced the mobo and the cpu.

I replaced the mobo first (which was confirmed dead on the RMA), which meant that the computer would actually spin up properly - even though it wouldnt boot or beep.

After leaving it on for a few hours, all the heatsinks were warm except for the CPU heatsink. So i RMA'd that, and bought and 5200. This arrived this morning, however theres no change except that the heatsink gets warm. So i've narrowed it down to the memory or the PSU.

I think its the memory but i dont working sticks so im gonna have to order some more.

This is a massive headache.......... SO SO frustrating :(

Gigabyte P43 S3L
E5200

is the new kit.
 
I'm borrowing some dodgy Arctic Silence 600w psu (not too dodgy, cost my mate 40quid), and some old ddr2.

I pray it works.............. PRAY :)
 
Back
Top Bottom