can't install drivers

CHUDS · 25 Dec 2006 at 14:40

ok i just got an Asrock 775Dual-vsta, c2d e6300, geil 2gig and corsair 520W psu. I also have 320gig WD sata HDD, nvidia 6200(don't worry changing it as soon as shops reopen).
i have built the whole computer but i don't know what to do now, the bios setting already done i thought i would put in the disk that came with the mobo, but how do i run it? i put it in and set the dvd drive to the boot up device but it said wrong boot up restart and insert right disk, what am i suppost to put in?
cheers

Jokester · 25 Dec 2006 at 14:43

The Windows disk.

Jokester

CHUDS · 25 Dec 2006 at 14:46

but do i not need to set up the sata hd first to be able to install on to it?

thefishdude · 25 Dec 2006 at 15:05

a lot of new motherboards come with the sata controller built in so you dont need to install serial ata drivers. try the windows disk. if it works great

if it dont it will just say cant find hdd or something and can then go from there.

Jokester · 25 Dec 2006 at 15:28

If you're using SATA RAID you'll need a set of the RAID drivers on a floppy and you press F6 when it tells you to when installing Windows.

Jokester

CHUDS · 25 Dec 2006 at 15:50

where do i get the raid driver from?

Jokester · 25 Dec 2006 at 15:51

You only need it if you're running a RAID setup.

Jokester

Rab · 25 Dec 2006 at 15:52

CHUDS said:
where do i get the raid driver from?

should not need this if only installing a sata drive without raid, just install windows should pick it all up. then when installed, install chipset drivers then g, card & windows updates, then anything u want