Case Cutting help

PureAppleJuice · 24 Apr 2006 at 19:39

Well basically I have an Antec P180, saw a couple of these modded whereby a 120.2 radiator for watercooling had been put in the top where the 120 fan slot is, but I need to cut out another 120 hole.
Need advice on how to do this. Might seem like a really stupid question, and most likely is, but is it possible to get like, dremel bits for a power drill rather than buying a dremel?

PureAppleJuice · 24 Apr 2006 at 20:18

Thanks a lot for the reply, certainly cleared a lot up. When I say Dremel bit I mean... well the little cutting bit at the end, which I take it you gathered heh, any idea where I could possibly get hold of one?
This would be my first form of modding so... yeh, any experienced members are welcome to comment

PureAppleJuice · 24 Apr 2006 at 21:06

Cheers, don't plan on using it often at all, just for this one mod. Not really much of a mod person but I thought i'd give it a go, hence seeing if I could get a dremel piece for my current drill

PureAppleJuice · 24 Apr 2006 at 22:09

Thanks for the reply

Don't want a round hole, want a square one to fit the 120.2 Radiator for water cooling, or is a holesaw still ample for that?

PureAppleJuice · 24 Apr 2006 at 22:33

Ah yeah, that'd be easier. Cut the extra round hole and then drill holes for the brackets, then cut to shape with jigsaw if really needed. So you reckon I should get a 114 holesaw?

PureAppleJuice · 24 Apr 2006 at 22:46

Alright - Gonna be using the Black Ice Xtreme II WaterChill radiator.
Cheers for your help, has really helped

Just got to do plenty of measuring now...

PureAppleJuice · 24 Apr 2006 at 22:54

Naturally - Will the plastic be a massive hinderance or will it make things easier as it is easier to cut? I'm not too fussed about looks as i'm happy to spend hours sanding

PureAppleJuice · 24 Apr 2006 at 23:06

Well cheers for help, certainly clears a lot of things up for me

I'll keep everyone posted how my first time project goes

PureAppleJuice · 24 Apr 2006 at 23:10

My bank is going to be getting a hammering very shortly

PureAppleJuice · 24 Apr 2006 at 23:38

Entirely WaterChill stuff; hopefully it getting it all fairly cheap off a friend.

- WaterChill Antarctica CPU Cooler (Socket 478/754/939/940/LGA775)
- WaterChill VGA Cooler
- WaterChill Chipset Cooler
- Dual Black Ice Pro 120mm radiator
- 4x 120mm low noise Adda fan
- WaterChill Xtreme 12V integrated pump/reservoir

It's just like the Extreme Kit that OCUK have but it was put together seperately over a longer period, if you get my point.