Project7
The Case: Corsair 900D
All about our Project's:
SevenSix Mods | Facebook
Custom-Sleeves:
SevenSix Customizing | Facebook
Hello im Dio7even from SevenSix Mods and
i want to show you our last big project.
Overview, used hardware:
CPU: Intel i7-4790K
MoBo: Asus Sabertooth z97 Mark S
Sound: ASUS Xonar STX
Ram: Avexir Blitz Series 1866mhz 4x4 GB
GPU: EVGA GTX 980ti Classified
PSU: EVGA Supernova 750W G2
Where is the mod?
- Cablemanagement ( Sleeves for the cables. only the bare necessities are visible.
- The HDD cage is covered with Plexiglas.
- We installed an S-Light as a cover for the PSU.
- The mainbaord-tray is covered with Plexiglas.
- The choosen coolingliquid is DP Ultra Orange.
- The case is accentuated with orange washers.
- Sleeved extensions are crossing inside of the S-Light.
- An to give it something special we decided to install a EVGA 980TI Classified with a unique custom made watercooler!
- The mainboard is üainted and got some decals.
- Than we installed a backplate on the soundcards back.
- And last but not least we decided to install Bitspower Shiny Silver fittings.
And now enjoy our photo series!
S Light (short)
Mainboard
Hier wurde das gesamte Kunststoff weiß lackiert, die Konnektoren am Board schwarz + Decal "Seven"
Radiators
Mainboard-Tray
Filter
reservoir
Sleeves und Extensions
Paintjob
HDD cover and tray
Case Front
pump bracket
First Run ( Leider noch ohne GPU Kühler )
GPU Kühler (sadly, without the gpu waterblock)
The grand finale!
I hoped you enjoyed it and we will meet us on Facebook!
The Case: Corsair 900D
All about our Project's:
SevenSix Mods | Facebook
Custom-Sleeves:
SevenSix Customizing | Facebook
Hello im Dio7even from SevenSix Mods and
i want to show you our last big project.
Overview, used hardware:
CPU: Intel i7-4790K
MoBo: Asus Sabertooth z97 Mark S
Sound: ASUS Xonar STX
Ram: Avexir Blitz Series 1866mhz 4x4 GB
GPU: EVGA GTX 980ti Classified
PSU: EVGA Supernova 750W G2
Where is the mod?
- Cablemanagement ( Sleeves for the cables. only the bare necessities are visible.
- The HDD cage is covered with Plexiglas.
- We installed an S-Light as a cover for the PSU.
- The mainbaord-tray is covered with Plexiglas.
- The choosen coolingliquid is DP Ultra Orange.
- The case is accentuated with orange washers.
- Sleeved extensions are crossing inside of the S-Light.
- An to give it something special we decided to install a EVGA 980TI Classified with a unique custom made watercooler!
- The mainboard is üainted and got some decals.
- Than we installed a backplate on the soundcards back.
- And last but not least we decided to install Bitspower Shiny Silver fittings.
And now enjoy our photo series!
S Light (short)
Mainboard
Hier wurde das gesamte Kunststoff weiß lackiert, die Konnektoren am Board schwarz + Decal "Seven"
Radiators
Mainboard-Tray
Filter
reservoir
Sleeves und Extensions
Paintjob
HDD cover and tray
Case Front
pump bracket
First Run ( Leider noch ohne GPU Kühler )
GPU Kühler (sadly, without the gpu waterblock)
The grand finale!
I hoped you enjoyed it and we will meet us on Facebook!
Last edited: