Cat C Bike

Loose rear light (click video)

https://vimeo.com/147167997


This is mine.

IMG_7005.jpg
 
Last edited:
15fhn5g.jpg


rrsfvd.jpg


yours is the same as mine benji,ive emailed r&g,see what they say,ive stuck a thin slither of black electrical tape over half on mine its reduced the glare from behind
 
same as mine

as for your loose light theres a rubber band type sleeve that it slots into,might be worth a check,its easy to undo,just pop the pushpins out and undo all the allen key bolts with the rider/pillion seat removed and the left/right rear plastic bodywork comes away

look on youtube on how to fit integrated tail light for zx6r 2011 and it shows you
 
brake lines finally came Wazza!

I went for white with black ends. They look great... in the box.

I don't have the time off anymore so fingers crossed I don't have to travel for work so I can look at it this weekend.
 
Looking through the bikes service history they brakes were done a year ago so defiantly time to do a complete change of the fluid.
 
slipg7.jpg


fd6q2u.jpg


got me a shroud,turns out it was missing one,they just push fit onto the numberplate light so are easily lost,might put a drop of glue on mine (its far better with it fitted,no dazzling white light from behind now)

also made me a ghetto reflector bracket out of some hacksawed damaged fairing panel
 
wazza300 said:
http://i63.tinypic.com/slipg7.jpg[/IG]

[IMG]http://i65.tinypic.com/fd6q2u.jpg[/IM]

got me a shroud,turns out it was missing one,they just push fit onto the numberplate light so are easily lost,might put a drop of glue on mine (its far better with it fitted,no dazzling white light from behind now)

also made me a ghetto reflector bracket out of some hacksawed damaged fairing panel[/QUOTE]

They recommend putting it on with super glue in the official R&G manual. No chance it'll stay on without some sort of glue!

Did R&G send it for free in the end?

Also, as far as reflector goes, take it off :p. You only need a little round one which can stick on the number plate for MOT time.
Click to expand...
 
"Yes it should come with the shroud, if you would like to send me your address I can get one shipped out for you":D

yeah they sent me one,whats up with my reflector? I don't like those tiny round ones they look like a zit that needs popping:p
 
wazza300 said:
"Yes it should come with the shroud, if you would like to send me your address I can get one shipped out for you":D

yeah they sent me one,whats up with my reflector? I don't like those tiny round ones they look like a zit that needs popping:p
Click to expand...

Nice :D

Just get rid of your reflector, looks better without one! The tiny round ones are just useful for sticking on when you need an MOT :)
 
A dealer near me sell the little round ones for a quid people stick it on before the mot then take them off when leaving.
 
kov0i.jpg


time for me to extenda my fender,the zx10r 08-10 are a straight fit for the 09-11 zx6r for anyone wondering,dont listen to the "only fit this model" baloney

was hard to find one for a 2011 zx6r
 
Using self-tappers or going to rely on the tape?

I have one for my bike, same make. Haven't put it on yet because Im wondering whether to put holes in the guard or not :(
 
self tappers,ill try and screw from underneath without poking through to the painted side

if I pull it off ill post up some pics
 
Just seen that reflector Wazza, You can't leave the 90's where they belong can you ;)

I have a 79p round stick on reflector on my full size number plate for MOT Day.
 
whats that scooby? I don't think I can self tap it without it going all the way through the mudguard,the plastic is just too thin,i could plastic weld it on

could Loctite glue it on but I just don't trust glues,some black tiny self tap screws you'd hardly notice and you could remove it easily if need be
 
You must log in or register to reply here.
Back
Top Bottom