• Notice regarding image hosts and attachments. See here.

Cheap Fan Controllers.

Soldato
Joined
23 May 2011
Posts
10,701
What is the general opinion on cheap fan controllers? I want a four fan one to control my four case fans (2x120mm and 2x 200mm) and i've found one for just over a fiver. I don't really want to spend 30 odd quid one since I've spent plenty on this rig already.
 
They work fine generally. You get some knobs to turn and when you do the fans get slower. What you don't get is high currents on channels, touch screens, LEDs or LCD screens.

I have an eBay £5 special and it works just fine. I set it up to the noise I want and then left it.
 
I'm looking at one now and it seems to just have 2 pin control and no splitters to plug in to the motherboard for monitoring.

BTW Any of these cheapos available in the UK ? Think I might take a punt.
 
I'm looking at one now and it seems to just have 2 pin control and no splitters to plug in to the motherboard for monitoring.

BTW Any of these cheapos available in the UK ? Think I might take a punt.

Yeah, don't mind monitoring them though, just set them to a noise level you're happy with, check temps and then leave it as is if you're happy :p. You can find 'em on the online version of Flog it, if you get where I'm coming from :p.
 
Just took a punt on one for 5.59. Only problem is, it's coming from Hong Kong so it's going to take ages to arrive :p. Looked at the feedback and saw a couple concerning the one I bought that said they were happy with it so it should be all good. Another thing I noticed is it supports 4 pin fans too :D.
 
Just looked at one for 5.59 from HK and it looks good, it even has LED backlight. Supports 4 pin fans but not PWM control. 30W regulated voltage is a fair amount too. I'm sure that one will be good for you.
 
I just hope you can turn the LEDs off ... You know what the Chinese are like with their bling :rolleyes: :p

Not with that one, it goes from 6-12V so will dim them a bit when the voltage is reduced. Need one with a on/off switch usually to control the LED's properly. I picked one of these up a few weeks ago...

http://www.nesteq.net/gb/products/fancontrollers/fanmax/

I have my main front intake and rear exhaust on the first set (of 4) which is always on, and then my other 2 intakes (side and bottom) and 2 exhausts (on top) on the 2nd set which I turn on for gaming and to make 2 LEDs come on. The cheap ones will be enough to cut the rpm in half (roughly) so will be fine for noise management and give you some added control over air flow but not be able to alter it drastically.

EDit* I thought you meant fan LEDs, realised you could mean the LED's on the fan controller and if you do then it's still a no, I messaged them a while back about it when I was scavenging cheap parts.
 
Last edited:
And I'm still giving an honest review on the cheap fan controllers too, stated above that they are good for reducing noise and adding a little more control to the air flow, but pointing out where they fall down at bits.
 
Back
Top Bottom