Check my Loop

Fluke · 16 Nov 2015 at 11:53

I am in the process of building a small rig everything has gone in ok and I am happy with the look, but its now time to install the tubing. I have gone for 1/2 5/8 Monsoon PETG tubing, before I start cutting and bending does the loop layout look OK?

Fluke · 16 Nov 2015 at 12:41

faheemrazzaq said:
Am I missing something obvious or you have forgotten to close the loop properly. Your CPU, mobo/ram blocks and 240mm rad no way come back to the reservoir and completely isolated.

No your right, :eek:

I will have another go.

Fluke · 16 Nov 2015 at 13:12

Thanks it now makes more sense.

I am hoping to just use 90 degree bends in the tubing, but space is going to be tight with the larger tube. I plan on running a Mayhems green UV pastel fluid, so should look nice.

Fluke · 16 Nov 2015 at 14:02

faheemrazzaq said:
it will definitely look great. Just double check that you are using the right pump out there. pump out must feed the 360mm rad. The direction of flow doesn't matter for other components in loop but your CPU block has a defined inlet and outlet. rest should be fine

Yes, the pump out runs to the 360 rad.