Check this for me please :)

breadturbo · 14 Jul 2009 at 23:07

wanted to ask if this looks ok, lowered voltage down as much as i can while stable
ran burntest on it seems fine, im not sure how to go about proceeding higher. ( upping fsb higher messes my ram up as its only 800 and i cant lower its down more)
In honesty i havent maxed my fsb, i have had it at 445 before and that wasnt the limit
whats the average max fsb folks get from P35's? (p5k deluxe)

cpu vid is 1.206v

on a side note i finished my car watercooling rad system, pics will be up tomorrow when i locate my phone-usb wire

after 24hrs leaving comp priming max temps were 42c!!! and idle was 25-26c per core

ambient is 18c

PhoenixUK · 15 Jul 2009 at 01:13

Get better set of RAM, 430mhz @ 5-5-5-18 is terrible.
You should be able to do 430-440mhz @ 4-4-4-12 and 5-5-5-18 should get you to ~500mhz with any decent pair of sticks.

Tried increasing NB and RAM voltage?

breadturbo · 15 Jul 2009 at 01:20

ill give it a try thanks

never really messed with ram before, its meant to do 4-4-4-12 at 2.0v if that sounds any good?

PhoenixUK · 15 Jul 2009 at 01:56

Yeh,

Get to ram settings in the BIOS and up the volts to 2.1v for RAM and see if it goes any higher.

1.3 for Q6600 isn't high either so you can add few notches there as well and see if that helps you any.