Cleaning Product Question

Associate
Joined
14 Oct 2008
Posts
173
I bought the Dust-Off Gaming Gear Duster so that I could clean the dust inside my case efficiently every now and then. Here's a link so people know what i'm talking about:

http://www.overclockers.co.uk/showproduct.php?prodid=KB-000-OP

My question is: is it safe to use with computer components. I sprayed a little in my hand a noticed there was moisture in it. Is this safe or is the cleaner only used for screens and keyboards etc...

Thanks for any help.
 
It should be ok to use with components - otherwise they'd probably tell you! To double check, spray some of the air onto a sheet of paper and see if there is any moisture - the heat from your hand could be causing some condensation.

Then dust off holding the can perhaps 10cm away from the part.

Hope it helps and merry crimbo :)
 
The 'moisture' is propellant. It evaporates virtually instantly.
Always spray in short bursts, do not shake the can (This agitates the propellant and causes it to come out of the nozzle) and stop before it gets cold and let it rest.
And always keep it upright.
 
Back
Top Bottom