clocking q6600 with x48 asus rampage

RizL4

RizL4

RizL4

Permabanned
Joined
1 Dec 2005
Posts
915
ok got the pc the other day set it up today so far



cpu on full load temps were 45 46 48 49 on the cores
When i was in the bios how do i set it so i can manualy set the fsb myself
I overlclocked the cpu by switching the cpu level up to one of the higher quads

3ghz so far
 
would keep an eye on the load temps.. run a prime95 every time you up the clock just to do a quick stability test.. make sure you stay under 75c load.. idle temps arent to bad especilly for the vcore
 
Setting overclocking in bios to "crazy" !! gets 3.51 G but when running prime it only does 3 cores and error on 4th what is the problem if i set it to auto overclock to 3ghz prime runs all 4 cores and its stable
 
Probably need more voltage. Don't use the auto settings in Bios.

Add me to messenger if you like and I'll talk you through the bios options. I remember the Maximus Formula SE and Extreme options off by heart. :o
 
dam this sux i cant get this thing stable its only stable at 3ghz Crucial Ballistix 2GB (2x1GB) DDR2 PC2-8500C5 1066MHz Dual Channel Kit (BL2KIT12864AA1065)
thats the ram i have does anyone have the same mix?
 
Word of warning: I have a similar vid to you. I needed allot more volts to get to 3.6 from 3.5. Currently @ 1.49
 
Booting is one thing, but you really want to stress test it to ensure it's stable. As a general rule, you want to keep you ram at the recomended volts and on very slack timings 5-5-5-15 to rule out ram related issues when you either don't post or BSOD whilst stress testing.
 
i do strees test and it fails with the ram i use is Crucial Ballistix 2GB (2x1GB) DDR2 PC2-8500C5 1066MHz Dual Channel Kit only stable max 3ghz should i get better ram?
Thought i could get 3.6ghz stable on this board and ram
 
You must log in or register to reply here.
Back
Top Bottom