Cold Boot Issues

Brutos · 10 Jul 2015 at 12:42

Hi 8pack

I have my chip overclocked to 4.4Ghz with the below settings and on every cold boot I get BSOD no matter how i adjust the settings. I hope you can give me some advise.

Ai Overclock Tuner: XMP
XMP 1600 9-9-9-24-2
BLCK 100
CPU Strap Auto
CPU Core ratio 44

CPU Vcore :Offset Mode
CPU Vcore Offset voltage :0.020
CPU VCSSA :1.110
DRAM Voltage : 1.500
CPU PLL Voltage : Auto
VTT CPU : 1.10v

CPU Load-Line Calibration : High
CPU Current Capability : 130%
VCCSA Load-Line Calibration : Regular
VCCSA Current Capability : 120%

CPU Power Phase control : Optimized
DRAM-AB Current Capability : 120%
DRAM-AB Power Phase Control : Optimized
DRAM-CD Current Capability 120%
DRAM-CD Power Phase control : Optimized

EIST : Enabled
Turbo Mode : Enabled
CPU C States Auto

Thanks.

elmarko · 11 Jul 2015 at 13:38

I may be blind here but it might be worth saying which processor you have.

FloppyPoppy · 11 Jul 2015 at 13:46

elmarko said:
I may be blind here but it might be worth saying which processor you have.

Can only assume he is using the i7 4930k in his signature

But maybe not.

Neil79 · 11 Jul 2015 at 15:15

CPU PLL Voltage : Auto

On an old board I used to have with an i5, this on Auto or Enabled used to cause Cold Boot issues as such it was disabled. Worth a try?

Other options could be raising volts slightly, more especially the ram?

8 Pack · 12 Jul 2015 at 00:55

RAM 1.65 also you added vccio? I presume your on ROG x79 board ??

Brutos · 14 Jul 2015 at 17:11

Hi,

Thanks for the responses.

Sorry I didn't mention before am using 4930K along with Sabertooth mobo.
I will up the RAM voltage and test again. I will also try CPU PLL Voltage disabled.

Thanks again i will report back once i tested again.

Brutos · 25 Aug 2015 at 23:36

Just an update so i have gone back to stock as no settings i try makes my cold boot issues go away. No sure if i should try a different MOBO to see what If it will affect the cold boot issues