Complete new build

Associate
Joined
9 May 2012
Posts
851
Location
South Wales
bHjlNDh9_o.jpeg
[/URL]
qTrr2uHs_o.jpeg
0WUPsygQ_o.jpeg
SH6j2VEH_o.jpeg
bRgYNWXk_o.jpeg
donjynd4_o.jpeg
fdvjNRxN_o.jpeg
3ijJyzgf_o.jpeg
[/IMG] hi guys we’ll i was hoping to re use my old case but I’ve had to go for a complete new re build
Following specs

Phanteks p400s Gun Metal Case
Ryzen 5 1600 @ 3.2ghz currently
Aorus AX370 Gaming 5
Dark pro edition 2 x 8 gb 3200 ram
Masterliquid lite 240 cooler
EVGA 500w psu
Crucial m2 275gb SSD nano
Samsung EVO 850 256gb SSD
2 x Corsair sp120 led top fans

More to follow

Had to order a extension for atx power tonight
 
Last edited:
Looking good !
Are you able to install AIO to too without any clashes ? Recommend doing this, yes it pulls warn air through the unit and out the case but won't effect temps to much, but means you can run front fans drawing cool air for GPU as CPU , as well as run them faster to get good possitive pressure in their to avoid dust being drawn in from unfiltered areas :)

Although I have seen you do intake from top and expelling out the front.

Hi orbital

Thanks for comments

I’ve had to mount the AIO Cooler at the front as due to size of b350 board it won’t mount at top of system, that’s why I have done intake at the top.
I did make a phone call to overclockers just to check on this as air rises I know and they said should be fine.
I think it’s the radiator on coolermaster masterliquid 240 lite is thicker than some too.

Quick question for you though mate, I have a Windows 10 pro 64 bit key and disc but cause I’m now going dvd less is there any other way I can install windows .
 
Last edited:
Cheap external DVD drive. Learnt the hard way ! Worth getting usb 3 if you can , plug straight to the back IO ports :)
Also you might find you have to install Mobo CD as Ethernet port not not work , nor wifi

I see, can't remember if the too mesh acted as a dust filters . Bit with enough pressure , should be ok. Might be worth getting the rear to intake as well, that way the left top fan won't lose out and will push GPU heat to the front as well

Yeah I have, I’ll have a look so have 3 intakes and cooler have has exhaust ?
I’ll have to have a look for cheap external then and delay starting up for few days
 
Gaming 3 most common spec'd for budget , but Aorus 5 on sale, does have better VRMs along with more VRM for power delivery and to keep the temps down . Normally to expensive but worth a mention on sale. Don't sell the Aorus K5 here which is a shame

My basket at Overclockers UK:
Total: £248.08 (includes shipping: £11.10)


£30 off and £50 off​

Cheers sir

I’m sure I’ve seen the k5 but here
PRODUCT INFORMATION:
GA-AX370-GAMING K5 AMD X370 (SOCKET AM4) DDR4 ATX MOTHERBOARD I think it’s that one
 
Last edited:
Update to build ordered Aorus GA-AX370-Gaming 5 AMD X370 (Socket AM4) DDR4 ATX Motherboard and 250GB 850 EVO SSD 2.5" SATA 6GBPS 32 LAYER 3D V-NAND SOLID STATE DRIVE (MZ-75E250B/EU) for build after old motherboard was faulty.

Big thank to @orbitalwalsh for the board recommendation
 
I wish I had seen this and the 45 page thread on the b350f before i bought it. :D Hope mines goes okay. I suspect you get these problems on lots of mobos though? Anyway hope you can post some pics. Ive got the team dark ram too hope it works.

Hi Alex on Page 1 is the original build, when I add the new mobo and ssd when arrives I will put new pics on
 
My basket at Overclockers UK:
Total: £148.69 (includes shipping: £8.70)

differing colours which is a shame, they do a black and white 140mm but not sure if its on sale for £4 for 2!


CODE
My basket at Overclockers UK:
Total: £21.46 (includes shipping: £8.70)

want one of the best of the best and have the bank balance

My basket at Overclockers UK:
Total: £70.67 (includes shipping: £8.70)
thanks sir
 
Hey can anyone give me a quick TL;DR run down on the problems with the ASUS B350F.

I have a friend over in Holland with one and for love nor money we can't get his RAM to run at anything over stock speeds. Could it be the mobo?

my problems was with it booting up, fans and lights would be on, but no boot, then a few hours later it might boot but then on shut down the fans was still spinning.

has he adjust the docp in his bios settings so he can set his ram speeds at all ?
 
Back
Top Bottom