The Compucase 8K01 does not come with any of these adaptors. It is a good-looking case which has a very noisy 1u HEC PSU. This can be sorted out by replacing the PSU with a fanless FSP120-50GNF (see https://www.shopfsp.com/fsp12050gnf-fanless/p/483.html). However, if the intention is to use the case with a LGA775 mini ITX motherboard, it would remain relatively noisy even with the fanless PSU, as there is very little breathing space for the CPU cooler which translates into increased noise.
This should be very quiet, if you use passive cpu cooling and the fanless FSP. If you need, however, to mount an exhaust fan, beware that it is a 60mm one and can be noisy.
Well, I had a Silenx iXtrema IXP-34-16 rated at 16db and could still hear it, due to turbulence effects (if you want a 60mm fan to move any air, you need not less than 2000 rpm). About the FSP: Why not, have just sent you an e-mail.Got a quiet 60mm. Wanna sell me your redundant FSP?
If the half-height PCI card conforms to the specification height of 51.51 mm (http://www.pcisig.com/specifications/conventional/conventional_pci/lowp_ecn.pdf), it will fit inside the case, but it might be necessary to remove the filter fitted under the perforated section of the top. Cutting the back might be a bit awkward though, as you might need to eliminate or relocate one of the 3 screws holding the top in place.
(most seem to be missing the 4pin ATX one)There are a couple of photos of it in my thread. Had a quick measure of the PSU's depth, Id say its around 42mm high, bit hard to get an accurate measure with it still in my case, but just over 40mm.
Love the case, but the PSU fan is the only problem. Its not so loud really, but can hear it during silent/quiet sections of films. Im on the hunt for a quieter or possibly fanless one to replace it with but cant find one with all the connectors I need
