Computer issues please help

Associate
Joined
5 Feb 2019
Posts
1
Hi,

I recently had a power cut and after my computer would turn on but there was no display at first I thought it was the power supply as it was very old and was the oldest component in my computer so I replaced it for a 1000w psu, however this didn't fix the issue, it powers but there is now signal goi g to my monitor. I secondly changed the motherboard and processor as that was the second oldest part and the graphics card was still lighting up and the fans where operating. This issue is still occur g even with no graphics card attaed. Oukd anyone please help on this issue thanks.
 
Got to be the monitor then, have you tried switching the monitor on, is there any message on the monitor screen like 'no signal', are there any lights on the monitor like green LEDs?
 
99.9% it is the RAM

Befire u use the new module reset bios by pulling out the battery and re seat the RAM sticks.
Try borowing another module from.a friend and see if that runs.
In most cases Ram would be an issue if everything is powering up but no video output
 
Back
Top Bottom