Configuration of Plusnet wifi router to a wireless access point

It should be the same as any other router...

  • Assign a suitable management IP
  • Disable DHCP
  • Connect one of the LAN ports to the network
  • Configure the Wi-Fi
Are you having a specific problem?
 
Your router will have an IP address (e.g. 192.168.0.1). This will also be your network's gateway address.

It will be running a DHCP server that issues IP addresses to your client devices in a defined range (e.g. 192.168.0.100 to 192.168.0.200).

Your management IP needs to be in the same range (e.g. 192.168.0.???) but selected to not clash with either the router's IP or its DHCP range.

In this example you could choose anywhere between

192.168.0.2 to 192.168.0.99

and

192.168.0.201 to 192.168.0.254
 
A friend of mine has just used an old router (albeit not a Plusnet one) as a wireless access point and found this article very useful.

Apologies if I've misunderstood what you are trying to do! :p
 
Last edited:
Back
Top Bottom