confused about double nat

gbaromman

gbaromman

gbaromman

Associate
Joined
31 Jan 2011
Posts
56
ok im pretty sure i got a double nat issue for port forwarding i have a superhub in modem mode and a cisco e3000 as a router my pc is connected to the e3000

and the e3000 ip is 192.168.11.1 the virgin superhub in modem mode is 192.168.100.1

when i ipconfig it comes up as 192.168.1.109
http://imageshack.us/photo/my-images/40/ipconfigv.png/

this is the superhub page
http://imageshack.us/photo/my-images/855/superhub.png/

this is cisco e3000
http://imageshack.us/photo/my-images/717/ciscoe3000.png/

basically im trying to port forward but it doesn't work on either of them
and cant figure out why ive tried putting superhub as modem and normal and still same thing kinda stuck on what to do next also i got an ip were i can log in 192.168.1.1. but the password is unknown to me as is the device so im ****ing confused here and any help would be great in figuring out what i can do
 
Unless you've configured your PC with a static IP there's a device on your network acting as a DHCP server that has issued the 1.109 address, it's presumably at 192.168.1.1.

There's either an additional device you haven't mentioned, or you're mistaken about the addresses the other devices are using.

Once the Superhub is in modem mode (and the router's WAN connection plugged into the correct LAN port) all the configuration will be done on the router.

If in doubt reset everything to factory settings and start again.
 
uugh this is why i hate networking it should be so simple yet they want to watch the world burn


also as far as i know ive mentioned everything that needs to be i got team viewer and skype if you dare to take a look
 
do an ipconfig /all and that will tellyou what the dhcp server is to start with.

what you need to hav is
super hub >wan of cisco > Lan
you can add me on skype and i can help if you need. drop me a mesage for skype id
 
You must log in or register to reply here.
Back
Top Bottom