Corsair 2GB DDR XMS3500LL Pro memory timings

Maxx1984

Maxx1984

Maxx1984

Associate
Joined
18 Oct 2005
Posts
38
Hi can anybody here recommend me some decent memory timings for running an Opty 146 at 2.8ghz on a DFi SLI D as im getting a bit stuck (beeing a stupid noob :/) any help appreciated :)
 
Ok thanks - will give it a try...

OK its booted into windows on 2.3ghz so far, haven't got much time to do testing yet. The ddr is running at 333, is this going to be a problem, cause a decrease in performance? or is keeping it at ddr 400 better??
 
Last edited:
Ok thanks for the feedback. With the actual overclocking I am just hoping to get to these high speeds of 2.8/3.0 not really expecting it too much. I am happy with the chip even running at stock speeds compared to my old cpu. Atm I am running at 250 on the memory so cpu clocked at 2.5ghz now :) yet to run any tests but got into windows fine. Idle cpu temp is pretty much the same as stock aswell (ok maybe a degree or so more)

Mem timing so far are:

2.0-3-6-2

Frq: 208.4mhz - according to cpu-z
 
Last edited:
Ive dropped the 6 to a five like you said, put the freq upto 216.7mhz (htt 260), boots into windows but failed the OCCT test after 55 secs :/ Is it worth trying to use a lower divider??
 
Ok looks like a sorted out the problem I was having by increasing the cpu volts. I Still need to finish the OCCT memory test then super pi for tonight. Do you thinkI may be able to get more than 2.6ghz with this memory or have I pretty much reached the memory's limit??
 
im on 2.7/2.8 now, its booting into windows now but failing the OCCT 30 min stability test, I have upped the voltages, changed the timings but still in the same situation so im probably going to put it back to 2.6ghz, where it previously passed the test and super pi. Also CPU-z is not displaying the ram frequency and FSB Dram in the memory section :/
 
You must log in or register to reply here.
Back
Top Bottom