Associate
- Joined
- 7 Aug 2013
- Posts
- 290
- Location
- Southampton [SO17]
hi guys just trying to find out what corsair's 300R max RPM's are on the supplied 140mm and 120mm fans it comes with? thanks guys
Corsair 300R fan spec?
- Thread starter tingting44
- Start date
- Joined
- 7 Aug 2013
- Posts
- 290
- Location
- Southampton [SO17]
ive googled corsair 300R fans, but google has nothing on then
OC do not give any details on the fans
you would atleast think OC or corsair would give you the spec???
OC do not give any details on the fans
you would atleast think OC or corsair would give you the spec???
Deleted member 135847
Deleted member 135847
140mm Corsair A1425L12S (Stock intake)
1000 RPM +/- 20% 54.0 CFM 20dBA 0.30A 3 pin
120mm Corsair A1225M12S (Stock exhaust)
1200 RPM +/- 10% 32.95 CFM 18dBA .11+/- .02A 3 pin
Intake Static Pressure 0.67 H20
Exhaust Static pressure 0.69 H20
Source>Corsair Tech Support
1000 RPM +/- 20% 54.0 CFM 20dBA 0.30A 3 pin
120mm Corsair A1225M12S (Stock exhaust)
1200 RPM +/- 10% 32.95 CFM 18dBA .11+/- .02A 3 pin
Intake Static Pressure 0.67 H20
Exhaust Static pressure 0.69 H20
Source>Corsair Tech Support
Good timing, I've been pondering about my 300R fans recently.
I have a H80 going into the rear of the case so the 120mm will be removed, the 140mm up front is a bit too noisey when everything is idle so was contemplating replacing the 140mm with the 120mm upfront. Will that have a big effect on temps do you think?
(sorry for the hijack but I think the OP has been answered?)
I have a H80 going into the rear of the case so the 120mm will be removed, the 140mm up front is a bit too noisey when everything is idle so was contemplating replacing the 140mm with the 120mm upfront. Will that have a big effect on temps do you think?
(sorry for the hijack but I think the OP has been answered?)
- Joined
- 7 Aug 2013
- Posts
- 290
- Location
- Southampton [SO17]
ohhhh very nice james!!! you the man!!! 
No worries orch mate, be good to know the answer to your question
No worries orch mate, be good to know the answer to your question
Deleted member 135847
Deleted member 135847
On the 300r the whole front panel just pulls off. The Allen bolts are fake. The panel is held in place by four metal tension clips. Be careful pulling it off as the top part can catch on the DVD drive (if you have one).
Also the dust filters in the front panel are not removable in any easy way. Only the bottom psu filter actually comes out. You CAN (if you really want) remove the front filters as they are held in place by the wire mesh (the mesh is bent over the edges of the filters) but I doubt, with metal fatigue, you would be able to bend them back and forwards many times without breaking the metal mesh.
Also the dust filters in the front panel are not removable in any easy way. Only the bottom psu filter actually comes out. You CAN (if you really want) remove the front filters as they are held in place by the wire mesh (the mesh is bent over the edges of the filters) but I doubt, with metal fatigue, you would be able to bend them back and forwards many times without breaking the metal mesh.