Corsair Carbide Series 275R Tempered Glass

actualsilver · 5 Oct 2019 at 18:46

Hi folks.
Having a problem installing
Kingston SA400S37/240G SSD A400 Solid State Drive (2.5 Inch SATA 3), 240 GB in the ssd bays in the case listed above.

The ssd won't clip into the bay seems a little bigger?

LuckyBenski · 6 Oct 2019 at 01:14

You often need to spring the frame put a little until it lines up with the screw holes. Does the tray have little pins that go in the screw holes of the SSD?

actualsilver · 6 Oct 2019 at 19:47

Hi, https://imgur.com/pRvFdgT
It doesn't fit

LuckyBenski · 6 Oct 2019 at 19:58

Do you mean the trays in the rack at bottom left of that photo? Or the SSD holding plates at top right.

The SSD plates, you remove and screw the SSD onto it from the rear then remount.

actualsilver · 6 Oct 2019 at 21:02

Hi again.
I did remove the plates should the ssd slide into them? The ssd seems a cm larger even if I apply pressure it wont fit into that black plate?
The width of the ssd seems larger than the plate
https://imgur.com/tVWD0Nz
https://imgur.com/fMLtHRf

LuckyBenski · 6 Oct 2019 at 21:50

The SSD goes ON that panel, on the "outside" of it. Screwed in through the main plate. I had exactly this problem for ages, trying to wedge the drive into the wrong side!

Try it this way:

actualsilver · 7 Oct 2019 at 00:35

Thank you so much!
Lol I feel so stupid it's my first time building a gaming computer haha

LuckyBenski · 7 Oct 2019 at 00:44

actualsilver said:
Thank you so much!
Lol I feel so stupid it's my first time building a gaming computer haha

We've all been there! Welcome to the forums