Corsair CX600(600w) will it be enought for my hardware ?

Skyforger · 29 Apr 2015 at 16:01

Recently my 700w psu died. All i could find in my town was a 600w.
The PSU calculators online says i would only need 450w but i want to be sure.
My specs:
i7 920 (use to run 3.8 Ghz overclocked)
3x 2GB DDR3 1333
GPU Gigabyte GTX 670

and 3 x average HDD

stulid · 29 Apr 2015 at 16:20

It should be, but there are two or three CX600 PSUS, two had like 40Amps on the 12V rail the latest one has 46A on the 12V rail which is obviously stronger/better.

The label on the side of the box/psu will tell you which it is.

Or of course buy from ocUK?

https://www.overclockers.co.uk/showproduct.php?prodid=CA-202-AN

Skyforger · 29 Apr 2015 at 16:26

i bought it already needed kinda ASAP and was the only one i found in town.
It's connected now so cant see the label, will disconnect and take picture.

Greybeard · 29 Apr 2015 at 19:09

You will be fine, even if you have the variant that has 40Amps on the 12v.

Skyforger · 30 Apr 2015 at 01:53

Greybeard said:
You will be fine, even if you have the variant that has 40Amps on the 12v.

Yeah i have the 40Amp one.
So far so good.
Hopefully will be able to hold the load when i play gta v

signal11th · 7 May 2015 at 11:03

You should be fine I have similar with a 780ti and my CX runs it all.