Corsair Dominator vs Vengeance CM*64GX5M2B6000Z30

[Alexrose1uk]

Hi Guys
Just wanted to see if anyone had any experience on any real differences between these two RAM series?

I'm considering grabbing a 64GB EXPO kit for the wife's new Black Friday overhaul, and it seems that Corsair do both a Dominator and Vengeance kit, with the exact same spec - 32GB x2, 6000 CL30-36-36
CMT64GX5M2B6000Z30
CMH64GX5M2B6000Z30

Even the part no is all but identical.

Price difference is currently £30 which isn't that extreme, but beyond the different look, and slightly chunkier heatsink, I'm struggling to see if there is any real difference, official pricing is almost £50 between the 2 kits, so you'd think SOMETHING should be different, but I'm wondering if it's all going to bling/marketing, or if there actually is some difference here, if so, I am guessing better heatsink, and maybe slightly better binning/QC?

Anyone know?

 

[Alexrose1uk]

My experience is zero difference. With AMD you just stick to 6000mhz anyway. Maybe someone else will have a different opinion.

Yep both are 6000, was just trying to workout if there was much more to it. The wife decided on the Dominators anyway whilst price was small but curious what the actual difference is.

I'd like to hope the Dominators get the best chips, and more likely to just run nicely with expo enabled, as 32gb dual rank DIMMs are a bit more demanding.

Might be nice to try overclocking them down the road also, especially if she ends up dropping a newer gen chip in later.

 

[Alexrose1uk]

I realised that, although appreciate the headsup! Luckily they are going into a system with 360MM AIO, rather than an air cooler, so no major concerns there (and the cooler is going to be side mounted, so slightly closer than with a front mount also)

 

[Alexrose1uk]

I've watched a few. Looks like the Dominators are A/M-die Hynix, and timings are relatively tight across the board even if not massively clocked, so likely with looser timings they could go a decent step or two higher based on what Buildzoid mentions. I noticed in a few of his videos he recommended 6000 CL30 for Ryzen also if you wanted out of the box 'no hassle', and seems this is about the best spec available that is EXPO rated. This is for the wife, so yes!

I would have gone for the G-Skills which are available more cheaply than the Corsair, but I paid the extra to order from the UK than the US just incase of any issues.

 

[Alexrose1uk]

Sad to hear that, touch wood the Corsair set bought for her system has just worked, at 6000 CL30, which isn't bad given its a dual rank 64GB set.
As it's for her system which is a more set and forget requirement, I will take that for what it is, even if they're not the quality/corsair of old.

 

[Alexrose1uk]

Afaik Most AM5 setups the sweet spot is 6000mhz. Beyond that you will have to tinker with the settings and it gets kinda sketch. There are some peeps that have managed to get it beyond 6000mhz but is it worth the hassle and frustration probably not. Be happy with the Corsairs.

That is exactly why I chose this, low CL, and reputation for being reliable at this density (32GB Dual Rank/64 GB kit), whereas the G-Skill was only orderable from the US at the time, as out of stock here, plus also read more compatibility issues..

 

[Alexrose1uk]

Agree with all of this.

Using Buildzoid as a reference, Dominator Platinum RAM isn’t the same as it used to be.

It used to be a promise of the best quality memory hands down back in the day but now it just looks good.

E.g., You can find top bin Hynix DDR5 modules in the most boring and ugly green memory modules these days which will overclock very well and are cheap.

Agreed, was just trying to ensure 100% as much as possible compatibility as its fairly dense and decent timings (CL30-36-36-76 iirc), the Vengence seems a little more hit and miss on binning as read a number of people reporting failures here at this specific spec and density
Plus, RGB makes the wife happy hah

 

[Alexrose1uk]

Yes, not all kits are equal and its hard to find the good from the bag. Luckily in another video he mentioned the timings of the kit I bought were actually half decent for 32GB DIMMs (CL30-36-36-76), so if its stable and runs with few issues bar the occasion motherboard retrain, then happy days. Also noticed it did not actually take that long to retrain after a change, less than a minute, which for 64GB doesn't seem bad at all.

Corsair's website is also hot garbage like Buildzoid says lol, I noticed that myself!