Corsair H100 4 pin PWM fans ??

MOOGLEYS

MOOGLEYS

MOOGLEYS

Soldato
Joined
24 Dec 2004
Posts
19,341
Location
Telford
I have just received my H100 and i'm considering using my 4 pin PWM fans connected to the block on the H100.
It appears the block has 4 x 4 pin connections for fans but I cannot find anything about if I can plug 4 PWM fans into the block. I'm sure you can but would like some confirmation if anyone has done this yet.
I might still just connect all the fans to run off the PWM fan header on the board as I then have full control over the fan speeds. Will the H100 run ok with no fans connected to it ?

Thanks for listening. :)
 
I have my fans off the H100 connected to my fan controller, so there's nothing plugged in to the block. I only built this pc a couple of days ago and have only set my fan controller up today and everything seems to be running ok so far. Temperatures still looking fine anyway.
 
MOOGLEYS said:
I have just received my H100 and i'm considering using my 4 pin PWM fans connected to the block on the H100.
It appears the block has 4 x 4 pin connections for fans but I cannot find anything about if I can plug 4 PWM fans into the block. I'm sure you can but would like some confirmation if anyone has done this yet.
I might still just connect all the fans to run off the PWM fan header on the board as I then have full control over the fan speeds. Will the H100 run ok with no fans connected to it ?

Thanks for listening. :)
Click to expand...


What were your temps before you changed cooler. And could you say what they are now?
 
With the hyper 212 Evo I was idling at 28.c and max load was around 77.c. Now with the H100 wired with the fans running from the mainboard PWM my idle is 25.c and max load is 66.c that's with a 4.6ghz 2500K...
 
Thanks for the info. So the H100 brought your max load down by 11c and idle by 3c.

Would you say the money was well spent?
 
You must log in or register to reply here.
Back
Top Bottom