Corsair Memory Not Hitting 2000MHz.

@ ViRuS2k

I was wondering what gadgets your using. I quite like the look of them!

Another thing - so if my VTT voltage is set at 1.45v-1.5v is my DRAM voltage ok set to 1.65v?

:)
 
1.45 = 0.2v difference, so yes
1.5 = 0.15v, yes

No idea on the effect of having an equal QPI/DRAM but general rule is 0.5v (i'd say 0.4v for safety margin) or less difference, at 1.65v the min QPI should be 1.15v, i would round that to 1.2v for a .45v difference, i think a lot of boards do 1.2v QPI minimum for that reason..


However, i'm not so keen on running the QPI that high, though like i said opinion varies. My main i7 has QPI at 1.325v and DRAM at 1.62v, quite lucky i think as its 12Gb Ripjaw @ 1600mhz 7 8 7 and 920 D0 at 4Ghz.
 
Last edited:
Combat Fighter said:
@ ViRuS2k

I was wondering what gadgets your using. I quite like the look of them!

Another thing - so if my VTT voltage is set at 1.45v-1.5v is my DRAM voltage ok set to 1.65v?

:)
Click to expand...


Hi im not really sure where i got them from lol and the long readout is called asus probeII

you want to keep your memory at 1.640v-1.650v and your QPI/DRAM/ at around 1.4-1.44v
but try to stabilize if you can at lower volts set those as max and bench then turn 1 setting down and bench again untill you go unstable then do the same for the other.

also remember to change your CPU pill voltage aswell as it will stabilize your cpu 1.80-1.88v max.

your better setting the cpu pill first as it will allow you to downclock the voltage on your cpu more aswell.
 
ViRuS2k said:
Hi im not really sure where i got them from lol and the long readout is called asus probeII

you want to keep your memory at 1.640v-1.650v and your QPI/DRAM/ at around 1.4-1.44v
but try to stabilize if you can at lower volts set those as max and bench then turn 1 setting down and bench again untill you go unstable then do the same for the other.

also remember to change your CPU pill voltage aswell as it will stabilize your cpu 1.80-1.88v max.

your better setting the cpu pill first as it will allow you to downclock the voltage on your cpu more aswell.
Click to expand...

What's the graphic eq one called above your volume one?

Cheers for tips by the way!
 
You must log in or register to reply here.
Back
Top Bottom