CPU Cooler

[xxtomox]

Hi all building my new pc and having issue under standing how my Corsair Hydro H75 Performance Liquid CPU Cooler installs.

I have mounted the radiator onto top of my phanteks luxe case along with the two fans attached but I cant work how it connects.

My case has a pre installed fan control circuit installed so the cable for that plus direct into my cpu fan motherboard.

For the Corsair Hydro H75 it comes with 2 x 3pin connectors and a 4pin connector. where should I connect them all to?

 

[Doomedspeed]

Hi.

The 2 x 3pins are for the H75 fans. So they can be attached along with your other fans, whether that be a fan controller or not.

The 1 4 Pin is IMPORTANT. Its the pump power connector. This needs to on 100% so either plug it in to the motherboard (most have more than one 4 Pin) running at 100%. You can normally find it around the first PCI-E slot.

You don't want it running PWM as it NEEDS to be 100% to work poroperly, i made that mistake once. Also 4 pins straight from the PSU run 100%, so thats an option too.

 

[xxtomox]

sorry my mistake. both fans are 4 pin I connected those to the y splitter and connected that to motherboard CPU Op. The pump power socket is a 3 pin I connected that to a 4 pin socket on motherboard is that correct?