CPU Loop Plumbing

[BattFink]

Hi guys

I'm currently in the process of trying to redo the loop on my machine & I've hit a mental stumbling block as to how to plumb up the CPU/MB part of the loop. So I thought I'd throw it out there to get a few ideas on how best to do it.

This is the current state of the affairs (e.g. all waterblocks fitted etc...):

(Sorry for the naff picture)

the loop will need to connect to the top radiator & the pump/res is off to the right

Tubing wise I've currently got a selection of 12/16mm acrylic tubing & EK HD fittings

This is what I did have in mind:

However it's proving to be very difficult to get the tubing to bend to the tight angles needed... Can anyone think of a better way?

Many thanks in advance

 

[BattFink]

...

Interesting layout, never really considered a loop within a loop setup.

I wonder if this would work better using the red path going from pump -> radiator & then use the yellow path as a return feed back to the reservoir

Thanks to those who responded... I was doing my absolute best to have to avoid using fittings, but I don't think there's any other way