Hi all,
Been having a problem with my PC, first COD4 was stuttering, someone suggested I check temps, while checking temps my PC is just stopping dead from anywhere from 30 mins to 2 hours even when doing nothing.
temp log from just before shut down
Am I reading this correctly? it looks as though Core#1 is having some serious temp issues while Core#0 is fine.
I have cleaned the PC out, it is now dust free, I have reapplied thermal paste and turned the Akasa EVO 130 fan up to full and it is still doing it.
Can you get diagnostic programs for CPUs? I really can't afford to spend money on new components right now so any help is very gratefully received
Is it also normal for a core to be constantly changing from a 0% load to a 41% load and back again every other second despite not doing anything with the PC?
EDIT: I have been running this PC fine for 2 years without a problem with overheating. Also, the fan is working, it makes quite a bit of noise and I can feel the draft on my hand. I have also taken the side off the case. No joy
Been having a problem with my PC, first COD4 was stuttering, someone suggested I check temps, while checking temps my PC is just stopping dead from anywhere from 30 mins to 2 hours even when doing nothing.
Code:
Session start: 19:55:51, July 7, 2008
CPUID: 0x20F32
Processor: AMD Athlon 64 X2 4400+ (Toledo)
Revision: JH-E6
Time & Date CPU Temperature Low temp. High temp. Core load CPU Speed
19:55:52 07/07/08 CPU#0 (Core#0): 28 28 29 2 2211.34
19:55:52 07/07/08 CPU#0 (Core#1): 39 39 41 2 2211.34
19:55:53 07/07/08 CPU#0 (Core#0): 27 27 29 3 2211.34
19:55:53 07/07/08 CPU#0 (Core#1): 40 39 41 3 2211.34temp log from just before shut down
Code:
21:05:46 07/07/08 CPU#0 (Core#0): 30 0 48 44 2211.34
21:05:46 07/07/08 CPU#0 (Core#1): 42 0 96 5 2211.34
21:05:47 07/07/08 CPU#0 (Core#0): 28 0 48 2 2211.34
21:05:47 07/07/08 CPU#0 (Core#1): 40 0 96 5 2211.34Am I reading this correctly? it looks as though Core#1 is having some serious temp issues while Core#0 is fine.
I have cleaned the PC out, it is now dust free, I have reapplied thermal paste and turned the Akasa EVO 130 fan up to full and it is still doing it.
Can you get diagnostic programs for CPUs? I really can't afford to spend money on new components right now so any help is very gratefully received
Is it also normal for a core to be constantly changing from a 0% load to a 41% load and back again every other second despite not doing anything with the PC?
EDIT: I have been running this PC fine for 2 years without a problem with overheating. Also, the fan is working, it makes quite a bit of noise and I can feel the draft on my hand. I have also taken the side off the case. No joy
Last edited:
