CPU volts fluctuating in cpuz, is it normal?

[SkeeterUK]

Bit worried as its 1.4 in bios but in cpuz its ranmly going fgrom 1.390 ish to 1.44 ish. Im a bit worried is it ok or if not how do i stable it out to 1.4 all the time?

Asus a8v deluxe rev 2 motherboard
Amd 64 3500+ cpu
asus v9999GE card (6800 2 power connectors)
Audigy 2 ZS
dvdrw
2gb GEIL ddr400 ram
arctic freezer 64 pro
1 led 120mm fan blowing at back

Akasa paxpower 400w psu
Bought recently, should be powerful enough.

On the othe comp i had befdore building this the amd xp 1900+ was rock stable volts at 1.75 so just woundering why its like this on this new comp.

 

[matt100]

does it on mine too and its perfectly stable.

probably something to do with draw on your 12v lines, they do fluctuate based on load.

 

[Xplo]

as long as 3.3v 5v and 12v are as near as these values as possible your fine voltage will always fluctuate nothing to worry about

 

[oTTo]

cpu-z does not give you totally accurate readings, it rounds the value up or down. If your voltage lies in the middle of 2 values then you will see it 'fluctuating'.
If possible, try putting a multi-meter across a molex plug to test 5V/12V and I'm confident that it'll be stable

 

[pastymuncher]

CPU-Z says that my cpu is only drawing 0.769v so i take what it says with a pinch of salt.
Yes cool and quiet is disabled and that was overclocked to 2.645ghz with 1.6v going through it.

 

[Jimbo Mahoney]

CPU-Z is 100% accurate.

It's the sensor on the motherboard which isn't