Cpu-z 1.40.8, voltage working

fornowagain · 1 Aug 2007 at 17:17

As per title, new beta. Reports the Vcore for my E6600 correctly for the first time, ymmv. More details in SPD as well.

http://www.cpuid.com/beta/cpuz.zip

Tom|Nbk · 1 Aug 2007 at 17:31

Wow works with my E6600 now aswell :eek:

4Qman · 1 Aug 2007 at 17:52

And my e6400. Great

Margaret · 1 Aug 2007 at 18:59

Using this version my CPU is reported at 2.6 Ghz with 6x multiplier, everything else says 3.1 and a 7x multiplier. :confused:

El Jimben · 1 Aug 2007 at 19:04

It reckons my vDimm is 2.5v, that sounds a little on the low side to me but hey, it is a beta version after all!

weescott · 1 Aug 2007 at 19:04

Doesn't work for me.

fornowagain · 1 Aug 2007 at 19:20

Gotta laugh. Fix one thing, break another.

If you can be bothered and you have a problem save a register dump, detail the problem and send to [email protected], it'll help them fix it.

Jokester · 1 Aug 2007 at 19:41

El Jimben said:
It reckons my vDimm is 2.5v, that sounds a little on the low side to me but hey, it is a beta version after all!

That's the SPD voltage, not a measured value.

Jokester

truebluecfc · 1 Aug 2007 at 19:42

My current version of CPU-Z tells me the Vcore perfectly anyway :confused:

Jokester · 1 Aug 2007 at 19:44

truebluecfc said:
My current version of CPU-Z tells me the Vcore perfectly anyway

It only works for lowish voltages, once you go over about ~1.4V it'll just read 1.25ish.

Jokester

Rab · 1 Aug 2007 at 20:22

lol says my voltage @ 1.68, when it @ 1.44 in bios

El Jimben · 1 Aug 2007 at 20:24

Jokester said:
That's the SPD voltage, not a measured value.

Jokester

Yeah but doesn't the SPD tab show the default values? If yes, then it is wrong.

fornowagain · 1 Aug 2007 at 21:25

SPD, Serial Presence Detect. Its what the RAM is programmed to start at when its plugged in, amongst other things. Default? I suppose so, though boards might have other ideas on default values.