cpu-z screenshot

elite · 5 Feb 2006 at 19:46

Just overclocking my memory when i changed the timing and now im missing some importent figures. Any idea how I can get these back, iv reinstalled cpuz.

is there any other programs which will work

elite · 5 Feb 2006 at 19:53

Kesnel · 5 Feb 2006 at 19:55

I think it might be to do with the divider you're using. I remember some weirdness in the display of ram freq when I used a 140 divider.

elite · 5 Feb 2006 at 20:03

well i dont no how to work it out, but if my fsb is at 260 and mem divider at 140 whats the freq? Any over 200 will probs give me a bad post as the rams on tight timing. So i dont want to change the divider if it means resettings bios.

Mattus · 5 Feb 2006 at 20:21

elite said:
well i dont no how to work it out, but if my fsb is at 260 and mem divider at 140 whats the freq?

260 * (140/200) = 182Mhz.

elite · 5 Feb 2006 at 20:56

260 * (150/200) = 185Mhz. <<<< thats what cpuz is saying now but it should be 195Mhz, think cpuz is fibbing to me Grr

monkeypants · 5 Feb 2006 at 20:59

Mattus said:
260 * (140/200) = 182Mhz.

Make thing compicated why don't you :rolleyes:

140/200 is the same as 7/10.

Also: what's that windows theme and where can I get it?

DanMc07 · 5 Feb 2006 at 21:19

monkeypants said:
Also: what's that windows theme and where can I get it?

Theme is called Vista XP White can be found on wincustermize

marc2003 · 5 Feb 2006 at 21:20

elite said:
260 * (150/200) = 185Mhz. <<<< thats what cpuz is saying now but it should be 195Mhz, think cpuz is fibbing to me Grr

cpuz isn't lying. download a64 memfreq 1.1 from here....

http://www.short-media.com/download.php?dc=72

and it will calculate the dram speed based on what speeds/dividers you are using....

elite · 5 Feb 2006 at 21:34

how isnt it lying? the calulations and its results just dont add up. and i cant open that file type iv downloaded

Martynt74 · 5 Feb 2006 at 21:40

So are you using 140/200 divider or 150?

If 140 then cpu-z is right if its reading 185 (give or take 2mhz) and i dont know where the confusion is :confused:

elite · 5 Feb 2006 at 22:04

right now im on 150 divider at 270fsb and cpu-z says the memory is running at 192.

(150/200) = 0.75 * 270 = 202.5 how does cpu-z get 192?

Mattus · 5 Feb 2006 at 22:32

What is your CPU multiplier?

(Sounds like it's not relevant, but with A64s it is!)

marc2003 · 5 Feb 2006 at 22:56

elite said:
how isnt it lying? the calulations and its results just dont add up. and i cant open that file type iv downloaded

it's a zip file. strange it has no extension though.... opens fine here in winrar.

now try it....

elite · 5 Feb 2006 at 23:23

harris1986 · 5 Feb 2006 at 23:27

seriously elite what is that theme? cos it's damn sexy

Martynt74 · 5 Feb 2006 at 23:37

harris1986 said:
seriously elite what is that theme? cos it's damn sexy

DanMc07 said:
Theme is called Vista XP White can be found on wincustermize

Kesnel · 5 Feb 2006 at 23:55

I'm more interested in the chip. Is that clock stable? What stepping is it?

elite · 6 Feb 2006 at 00:34

Couldnt get 2.8 stable on 3d06 or 3d03 but I can on 3d01 and 3d05. So I've taken it down to 2.7Ghz for now. Temps are ok and it will do me fine till I get watercooling.

anyways taken a screenshot of 3d 06

p.s I dont no the stepping, cpu is from usa

lokkers · 6 Feb 2006 at 14:45

I had that problem when I had two copies of cpu-z running. the first one will show the ram freq and timings, but the second copy wont. Just use the first one opened to see the ram details, and the second one to see the cpu details.

hope that helps