• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

CPUZ Benchmark (all welcome)

CPU-Z.png


Here is my i7-860 from 2009 running at 22x 169 = 3.7GHz; RAM is DDR3 at 1,694MHz I calculate that as 2,037 overall score (I'm relieved I beat the Q9650!)
 
Just popped my 10900K which replaces the 4930K from earlier.

After a quick overclock it will not go above 5.4Ghz so i'm sticking with 5.3Ghz and playing with lowering the voltages.

The difference between the 4930K at 4.6Ghz and this 10900K at 5.3Ghz is night and day, feel like i've potentially got a pretty good chip! This is with 4400Mhz DDR4 also.

dQIcHdW.jpg OKklW9C.jpg

Edit: Final tweaking gives me this:
wccunzM.jpg

8782.6.

Is this good for a 10900K?
 
Last edited:
Update! Going to re-connect my chiller and try to match @Nickolp1974 on clock speed, can't let that go without at least trying to match it! lol

Going to be interesting using the chiller tonight because I have a new waterblock installed. Hopefully it performs at least on par with the old heatkiller.

12.jpg

Capture-rev-12.jpg
 
As my result has a TDP of "na" in the sheet, I thought I'd provide an update :)
AMD says it is 240W but hwinfo measures it at about 206W when benchmarking
2022-02-19_epyc_74f3_hwinfo.png
 
Last edited:
7980XE @ 4.8 Ghz. An old but still reliable CPU for me. Only thing is its paired with pretty garbage first gen now, 3000 Mhz and crappy latency so likely not helping that much.

tyDrbvQ.png
 
Nickolp1974 said:
@storm-chaser have you found the time for the chiller yet???
Click to expand...
What a cooling disaster I had last night. Really need to upgrade this rig to quick disconnect fittings so I don't have to mess about like this. I usually pinch the lines with a vice grip but I didn't get it just right, moved the line aside and it went on leaking as I prepared the heat exchanger and it's lines and pre-filled it. Well, it drained both reservoirs and most of my radiators before I noticed. My coolant loop is relatively complex so getting it bled was a total nightmare and I put extra work on the pumps while trying to prime it. So no, I didn't get the system up and running with the chiller yet. Because I lost most of the fluid in my loop there was no way I could run this rig outside at subzero temps. So I have to get some more methanol tomorrow, hopefully. Right now it's just water to keep me up and running.

EDIT: New water block to try out! looking forward to that. Amazon special for $14.99 :D

Here is my rig and the octopus of a cooling system. You can see why this might present a problem

download.png
 
storm-chaser said:
What a cooling disaster I had last night. Really need to upgrade this rig to quick disconnect fittings so I don't have to mess about like this. I usually pinch the lines with a vice grip but I didn't get it just right, moved the line aside and it went on leaking as I prepared the heat exchanger and it's lines and pre-filled it. Well, it drained both reservoirs and most of my radiators before I noticed. My coolant loop is relatively complex so getting it bled was a total nightmare and I put extra work on the pumps while trying to prime it. So no, I didn't get the system up and running with the chiller yet. Because I lost most of the fluid in my loop there was no way I could run this rig outside at subzero temps. So I have to get some more methanol tomorrow, hopefully. Right now it's just water to keep me up and running.

EDIT: New water block to try out! looking forward to that. Amazon special for $14.99 :D

Here is my rig and the octopus of a cooling system. You can see why this might present a problem

download.png
Click to expand...

Damnnnnnnn :D good man for trying with that!!! i always have a spare block so i can leave the original cooling in tact. WOW still cant get over that pic!!!
 
Nickolp1974 said:
Damnnnnnnn :D good man for trying with that!!! i always have a spare block so i can leave the original cooling in tact. WOW still cant get over that pic!!!
Click to expand...
Smart thinking. I might have to do this as well.

Everything is now hooked up and the chiller is just chillin for the moment - cooling off on the front porch. Waiting for the temps of the methanol to go down to 25*F before I start trying to break your MHz record. I'll do my best, but I am going to say right now that score is going to be very difficult to beat. Especially if this water block is not up for the task. I will also likely need -10*F climate to bench at 5700MHz. But I know the CPUs upper limit is actually above 5.8GHz.

Excuses excuses, I know! :D

This is what my computer is reporting (temps are slowly dropping):
Capturedafdf.jpg

Expect an update in about an hour.
 
storm-chaser said:
Smart thinking. I might have to do this as well.

Everything is now hooked up and the chiller is just chillin for the moment - cooling off on the front porch. Waiting for the temps of the methanol to go down to 25*F before I start trying to break your MHz record. I'll do my best, but I am going to say right now that score is going to be very difficult to beat. Especially if this water block is not up for the task. I will also likely need -10*F climate to bench at 5700MHz. But I know the CPUs upper limit is actually above 5.8GHz.

Excuses excuses, I know! :D

This is what my computer is reporting (temps are slowly dropping):
Capturedafdf.jpg

Expect an update in about an hour.
Click to expand...


the problem i have when i use ice is the pump, its only a £20 pond pump and flow is great for the 1st hour after that it must be freezing something as it just gets slower and slower. good luck with the frequency attempt ;)
 
Nickolp1974 said:
the problem i have when i use ice is the pump, its only a £20 pond pump and flow is great for the 1st hour after that it must be freezing something as it just gets slower and slower. good luck with the frequency attempt ;)
Click to expand...

Probably slush in the lines... As for me, no go on matching your MHz result at the moment. I did get to 5.7GHz but it crashes half way through the benchmark. So I think it's most likely due to the ambient temps here right now and the el cheapo waterblock which I picked up just for kicks. That combination is not letting get any higher than 5.7GHz.

Yaayuh! said:
@storm-chaser

Can I please request that you do 2 leader boards? One of multicore and one for single core.

Makes it easier to find single core score for comparison.
Click to expand...

Single Core leaderboard (disregard multi and overall score)
Capture-one.jpg

Capture-two.jpg
 
storm-chaser said:
Probably slush in the lines... As for me, no go on matching your MHz result at the moment. I did get to 5.7GHz but it crashes half way through the benchmark. So I think it's most likely due to the ambient temps here right now and the el cheapo waterblock which I picked up just for kicks. That combination is not letting get any higher than 5.7GHz.
Click to expand...

Nah no slush, just the pumps innards freezing up, cheap components that's all.
That will be it for me now until the KS variant becomes available or unless I have a dabble with LN2 again which I doubt but I will say never say never
 
You must log in or register to reply here.
Back
Top Bottom