Crashing Due To Unknown Reason!

AmzP88

AmzP88

AmzP88

Associate
Joined
17 Apr 2011
Posts
11
Hey There, Wonding If Anyone Can Help ME!

My Rig..

500W PSU
Gigabyte 880GA-UD3H MoBo
AMD 6 Core 1090T Processor
1TB Sata3 HD
8GB (4x2GB) OCZ Special Ops 1600mhz 8-8-8-24 1.65v Ram
Inno3D GTX 260 Graphics

Everything Was Running Fine, Until I Installed An Extra 4gb Of My Ram, Then Suddenly Programmes Started Crashing, My Mate Said It Could Be Your Bios Settings And I Found That The Ram Voltage Is At 1.5v And The Timings Are Set To 9-9-9-30, So I Tried Setting It To The Ram Timings It Is Supposed To Run At, And Then Suddenly I'm Getting Physical Memory Dump Blue Screen, Suddenly My Windows Isn't Genuine And All Sorts Of Programme Crashes! My Mate Said It Could Be That You Need Another PSU, Any Idea's.. Anyone?!.. Please! :(

Cheers!
 
The Power Supply Is A HighPower 500w From PC World, Ooooh!! More Help PLEASE! :D Lol.. My Board Needs A 8Pin +12v Connector, At A Price Range Of £60-£100 Max.. What PSU Should I Get? I Want One That's Gonna Really Overclock And Also Power My Soon To Be Purchased GTX580, Was Going To Do Dual SLI But One Of My PCI Is Only 4x So Might Just Keep My GTX260 For PhysX
 
Ok Did The Memtest And I Found Errors, Reset My Bios And Seems Stable.. But It's Only Running At 1333mhz At 1.5v.. Even When I Had It OC'd In CPU-Z It Showed It Running At 1.5v! I Dont Get It.. It Is VRAM That I Have To Increase The Voltage To Aint It?
 
Right So Here I Am At 2.35am.. ******* Annoyed!!
Dont Understand What's Going ON.
I've Got Memtest86.v4.
I Put The Bios To Factory And Ran It..
Failed At 30%.. (When I Say This.. I Mean.. Loads And Loads Of Fails)
I Upped The Ram Voltage To 1.65v And Kept The Other Settings As Auto.. (1333mhz @ 9-9-9-30)
Failed At 30%..
I Changed The Speed To (1600mhz)
Failed At 30%
I Changed The Timings To 8-8-8-30
Failed At 30%
Clocked Down To 1.5v Running at 1070mhz At Standard Timings..
Failed At 30%..

But Honestly Doubt That The Ram Is Bad.. I Mean I Havn't OverClocked Them Past What They're Recommended.. Constantly Been Under-run!

I Just Don't Understand..

Could It Be That The PSU Isn't Powerful Enough?
Could It Be That I'm Forgetting To Do Something Else In The Bios?

Or Could It Be That Either Ram Or Mobo Is Faulty?

Thanks For All The Help So Far.. Please Help More Though! :(

Please fully star swearwords
 
Oh Forgot To Add..
Tried Each Stick Individually..
Failed At 30%.. With Each Stick!..

What Errors Am I Getting?..
The Bottom Part Just Goes Red With Loads Of Running Errors! Doesn't Stop!
 
******* hell! No more caps Ok! Jeeez! Right gonna give it a go now then, will start with removal of the batt and boot, followed by trying another dimm slot..

cheers for the help

Please fully star swearwords.
 
Dynomutt said:
well, ran memtest and produced errors when running @ 1600Mhz with both 8-8-8-24 and 9-9-9-24, will only pass when set to 9-9-9-24 @ 1333Mhz, I have sent an RMA request and been offered a replacment or refund, opted for replacment with a different set of sticks Corsair XMS 1600 C9's, but will give the OCZ's another chance if they cannot do this.
Click to expand...

Well I think im gonna have to send an RMA request too, constant crashing and I've tried everything! :(
 
You must log in or register to reply here.
Back
Top Bottom