Crossfire 7950 boot failure

[xTommy92]

Hi Guys,
Just received my new 7950 today and have just installed it and turnt the PC on. The problem is when I start up it brings me straight to the BIOS screen and says "Boot Failure", with three options:

1. Load Defualts and Boot
2. Load Optimized Defualts and Reboot
3. Enter BIOS

Any help would be appreciated.
Thankyou,
Tom

 

[xTommy92]

Also with mechainal keyboards is there a certain way to use them within BIOS as my keyboard will not register anything but glows and it is plugged in?

Tom

 

[xTommy92]

Maybe you disconnected your SSD or HDD by mistake...

I will quickly check, might have done as all the cables are pretty close! xD

Tom

 

[xTommy92]

The SATA cables are right between both GPU's so not easy to check but they are connected even though they move about a little, the second GPU fans are spinning so power is going to it.

Tom

 

[xTommy92]

Could it possibly be the CCC drivers, maybe disconnect the second card and boot up and delete the drivers, put the second card back in and re-install?
I have a Sound card connected in the PCI 1 Slot which from the manual says should still be activated whilst both PCI_E slots are being used?

Tom

 

[xTommy92]

Thankyou guys for the help!
I used another keyboard which seemed to let me scroll in the BIOS, saved and exited and it rebooted fine. CPU overclock settings have now gone back to default but will overclock them again!

Tom