DAN CASE A4-H2O CASE AVAILABLE FOR PRE-ORDER

Gibliotech · 9 Feb 2022 at 12:00

Lian Li and DAN Case have teamed up once more to bring you an update on the A4-SFX PC Case. They have collaborated to create the A4-H2O Mini-ITX Case, a celebration of the small form factor. This dinky chassis can accommodate high-performance hardware and water cooling, whilst barely taking up any room on your desk. Fans of the SFF build, you are going to enjoy this bad boy.

Dan Case A4-H2O A3 Mini-ITX Case - Silver @ £99.95 inc VAT
https://www.overclockers.co.uk/dan-case-a4-h2o-a3-mini-itx-case-silver-ca-00a-da.html

Mini-ITX chassis, Steel frame, Mesh aluminium panelling, Supports triple slot GPUs, 240 AiO cooling, SFX/SFX-L support

Only £99.95 inc VAT.

ORDER NOW

Dan Case A4-H2O X3 Mini-ITX Case - Black @ £99.95 inc VAT

Mini-ITX chassis, Steel frame, Mesh aluminium panelling, Supports triple slot GPUs, 240 AiO cooling, SFX/SFX-L support

Only £99.95 inc VAT.

ORDER NOW

Dan Case A4-H2O A4 Mini-ITX Case - Silver @ £134.99 inc VAT

Mini-ITX chassis, Steel frame, Mesh aluminium panelling, Supports triple slot GPUs, 240 AiO cooling, SFX/SFX-L support

Only £134.99 inc VAT.

ORDER NOW

Dan Case A4-H2O X4 Mini-ITX Case - Black @ £134.99 inc VAT

Mini-ITX chassis, Steel frame, Mesh aluminium panelling, Supports triple slot GPUs, 240 AiO cooling, SFX/SFX-L support

Only £134.99 inc VAT.

ORDER NOW

McPhee · 9 Feb 2022 at 12:42

Ordered mine. Nicely timed sale on the EK AIOs too

Any clue as to when they are due in?

LukasBB · 9 Feb 2022 at 13:28

is pcie4 riser the only difference?

jrodga2k5 · 9 Feb 2022 at 13:43

McPhee said:
Ordered mine. Nicely timed sale on the EK AIOs too

Any clue as to when they are due in?

I will say one thing about the EK AIO's having built in the Lian Li Q58 is that the hose placement/mechanic isn't the most flexible when fitting into a small space. It's worked just about with the Q58 so something to keep in mind.

Good video here which actually shows an EK AIO installed, not much of an issue then

https://www.youtube.com/watch?v=69UJCLJ9E4Q

McPhee · 9 Feb 2022 at 18:15

jrodga2k5 said:
I will say one thing about the EK AIO's having built in the Lian Li Q58 is that the hose placement/mechanic isn't the most flexible when fitting into a small space. It's worked just about with the Q58 so something to keep in mind.

The EK is one of the AIOs recommended by the designer.

ASUS ROG Ryuo 240
ASUS ROG Strix LC 240
ASUS TUF Gaming LC 240
be quiet! Pure Loop 240mm
Cooler Master MasterLiquid ML240 (All versions)
Corsair Hydro Series H100x
Corsair Hydro Series iCUE H100i RGB Pro XT
Corsair iCUE H100i Elite Capellix
EK Water Blocks EK-AIO 240 RGB/Basic
Enermax Liqmax III ARGB 240
Fractal Design Celsius+ S24
Fractal Design Lumen S24
NZXT Kraken X52
NZXT Kraken X53
NZXT Kraken X53 RGB
Phanteks Glacier One 240MP
Phanteks Glacier One 240MPH

It might turn out that it's not the best choice. But it ticks a lot of the boxes for this case.

jrodga2k5 · 9 Feb 2022 at 22:00

McPhee said:
The EK is one of the AIOs recommended by the designer.

EK Water Blocks EK-AIO 240 RGB/Basic

It might turn out that it's not the best choice. But it ticks a lot of the boxes for this case.

It'll depend on your motherboard heatsink placement in all honesty, it was highlighted in the video linked. Probably a more be careful with that choice as the block doesn't play too well with large heatsinks around the VRMS etc in such a tight space

Good list and very very useful.

McPhee · 9 Feb 2022 at 22:33

jrodga2k5 said:
It'll depend on your motherboard heatsink placement in all honesty, it was highlighted in the video linked. Probably a more be careful with that choice as the block doesn't play too well with large heatsinks around the VRMS etc in such a tight space Good list and very very useful.

I'm on the Gigabyte B450, which came out before the current heatsink insanity went too far. So I'm fairly confident most coolers will be fine. At worst I have to remove the VRM heatsink, which isn't really needed with a stock R5 2600 anyway.

MattyKHZ · 10 Feb 2022 at 23:15

McPhee said:
The EK is one of the AIOs recommended by the designer.

ASUS ROG Ryuo 240

ASUS ROG Strix LC 240

ASUS TUF Gaming LC 240

be quiet! Pure Loop 240mm

Cooler Master MasterLiquid ML240 (All versions)

Corsair Hydro Series H100x

Corsair Hydro Series iCUE H100i RGB Pro XT

Corsair iCUE H100i Elite Capellix

EK Water Blocks EK-AIO 240 RGB/Basic

Enermax Liqmax III ARGB 240

Fractal Design Celsius+ S24

Fractal Design Lumen S24

NZXT Kraken X52

NZXT Kraken X53

NZXT Kraken X53 RGB

Phanteks Glacier One 240MP

Phanteks Glacier One 240MPH

It might turn out that it's not the best choice. But it ticks a lot of the boxes for this case.

I was originally going to buy a T1 but could never get it or gave up trying. Have an alphacool lt240 that was recommended for that so hoping it will fit in one of these.

nearly got an Ncase M1 but that is now eol. Hope I can get one of these and use some of the bits I have.

MattyKHZ · 10 Feb 2022 at 23:18

And on a separate note, when I can get hold of one, would a 3060ti FE be ok in one of these?

McPhee · 17 Feb 2022 at 11:45

Any ETA @Gibliotech?

I gather Caseking started shipping today.

t2na · 17 Feb 2022 at 12:31

MattyKHZ said:
And on a separate note, when I can get hold of one, would a 3060ti FE be ok in one of these?

It looks like it comes with stand offs for the FE cards so you can create a bit of space for the flowthrough design - so yeah, if it's anything like the Formd T1 then a 3060Ti FE will be fine in this case!

Gibliotech · 17 Feb 2022 at 13:52

McPhee said:
Any ETA @Gibliotech?

I gather Caseking started shipping today.

Mid March from what I can see @McPhee

McPhee · 18 Feb 2022 at 00:30

Gibliotech said:
Mid March from what I can see @McPhee

Thanks. I've put in a cancellation request.

I'll take another look when they're in stock.

wpuk · 24 Feb 2022 at 10:52

Has anyone heard of any rumours for an ETA?

wpuk · 25 Feb 2022 at 11:24

Hi, I have been given an ETA of the 21st March, so not to long to wait.

MattyKHZ · 5 Mar 2022 at 19:05

Hopefully the alphacool lt240 will fit, need to check the specs and measure up but for some reason not on the list of Dan for radiator that will fit. It was the one to use on the T1 which is why I got it. That is still not out yet and this case at a much more affordable price makes it a no brainier.

t2na · 23 Mar 2022 at 20:43

Has anyone started receiving theirs yet? Still undecided about swapping from an Ncase M1 to this case, feels almost pointless considering the size differences are minor between the two.

Tiamat21 · 29 Mar 2022 at 15:11

End of March now. Did stock actually arrive for these?

Combat Fighter · 2 Apr 2022 at 11:10

Was thinking of getting one these but after looking at reviews gone for a NR200P MAX which looks better imo, has far better cooling and gfx card fitment.

MattyKHZ · 6 Apr 2022 at 22:06

And now a price increase….

**DAN CASE A4-H2O CASE AVAILABLE FOR PRE-ORDER**

DAN CASE A4-H2O CASE AVAILABLE FOR PRE-ORDER