DDR 500

ichabod crane · 5 Jul 2006 at 20:48

Ok i have some DDR 500 got it today, now if im runnin my CPU at stock what do i run the memory at?? 400 so that is 1-1 or 500 which would be cpu at 200 and memory at 245 so 2-1 (or there abouts) which do i do??

ichabod crane · 5 Jul 2006 at 21:31

does it make much difference really? AMD 3700

ichabod crane · 5 Jul 2006 at 21:41

ok cool well according to cpu z ram is at 245 on ddr500 so i might try 245 x9 see what we get. an dmaybe later i will change to 245 x 11 and get a clock of 2.7g but when it cools down a bit thanks

ichabod crane · 6 Jul 2006 at 09:56

ok dave it didnt go to play!! i can boot with CPU at stock and ram at DDR500, but if i chnage the cpu to either 245 x11 or x9 it wont boot! so for now i put the ram at ddr400 and cpu at stock so its 1.1 with ram underclocked. i dont think my board will allow me to run a high FSB like 245 with ddr 500. so if i clock my cpu 245 x11 (2.7ghz) runnnin ddr400 the ram will be on 245 also practically ddr 500. reckon that will be ok?

ichabod crane · 6 Jul 2006 at 10:23

DDR 400 is what the ram is set to in bios. 2.8volts is that a lot? cos there is no fan over the memory wont hurt it?