DDR2 1333+Mhz

[Tabasco]

Hi all where can i buy DDR2 1333+ memory modules?

The new Gigabyte Mobo i just got says the following :

"DDR2 1333+ is supported with combination of AM3 processors and qualified memory modules"

and does that mean i would need to use DDR2 1333+ befor i can use a 6 core CPU , ..

Ill post the Mobo specs

LINK >> Motherboard


- Support for AM3/ AM2+/ AM2 processors
- Hyper Transport Bus 5200/2000 MT/s
- Chipset North Bridge: AMD 770
- South Bridge: AMD SB700
- Memory 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory (Note 1)
- Dual channel memory architecture
- Support for DDR2 1200(Note 2)/1066/800/667 MHz memory modules
- Support ECC memory (Note 3)
- Audio Realtek ALC888 codec
- High Definition Audio
- 2/4/5.1/7.1-channel
- Support for S/PDIF In/Out
- Support for CD In
- LAN Realtek 8111C chip (10/100/1000 Mbit)
- Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIE_16) (The PCI Express x16 slot conforms to PCI Express 2.0 standard.)
- 4 x PCI Express x1 slots
- 2 x PCI slots
- Storage Interface South Bridge:
- 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
- 6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3) supporting up to - 4 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1 and RAID 0+1
- iTE IT8720 chip:
- 1 x floppy disk drive connector supporting up to 1 floppy disk drive
- IEEE 1394 T.I. TSB43AB23 chip
- Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a headers)

I have the Rev 2.0 version , and with a bios update i can use the 6 core chips.

LINK >> GA-MA770-UD3

Thanks in advance for your time.

Regards
Tab

 

[Tabasco]

Nope, just means you can use 'up to' 1333Mhz RAM with it. Go for some 1066MHz sticks, more than fast enough and doesn't have the silly premium that higher clocked DDR2 sticks have.

Thanks for your reply Redmint most greatful.