DDR5 OC/Tune Advice

Wing-Man

Wing-Man

Wing-Man

Permabanned
Joined
30 Dec 2021
Posts
3,642
Location
Yorkshire
Good evening, i picked up a very cheap 32gb 6000mhz cl30 kit (other timings are poo)
i was very cheap so i thought i would grab it to play with.

i have never done any DDR5 OC, the sticks in my AMD rig are set to expo and left alone as there was the big AMD ram cpu killing thing

KIT: ADATA XPG Lancer Blade 32GB DDR5 6000MHz CL30 Desktop Memory(single rank)
Running 100% stable at EXPO setting

i will test with TM5, any advice on what to do.. do i chance Mhz or working on timings
What is a good voltage for DDR5


 
Last edited:
Jamin280672 said:
This is a great starting point, for pretty much any DDR5 regardless of IC's, ive ran these timings on M die and A Die......if you can stay awake and will improve performance quite a bit.

Jump to 4mins.10 if you want to get some of the babble out of the way and get on with it.

EDIT: SOC voltage is not safe upto 1.4v as per the video, max safe is 1.3v and also the FCLK being fastest at 2033mhz bug was fixed, so its no longer the case, keep everything 3:3:2 so 6000mhz ram = 2000mhz FCLK.

youtu.be

Easy memory timings for Hynix DDR5 with Ryzen 7000

Text version: https://www.patreon.com/posts/low-effort-rank-77403831My Patreon: https://www.patreon.com/buildzoidTeespring: https://teespring.com/stores/actu...
youtu.be youtu.be
Click to expand...

well this just worked. stable and zero errors.
i dropped the main timings the other days and there stable with this set of timings.
 
i ended up running the BZ timings for a bit they was stable.

but then i want back to XMP i nipped up the 2nd and 3rd timing but not as tight as BZ said, and i set the ram to 6400Mhz it been there for a week with no problems passed a few runs on TM5
Today i set the ram to 6600Mhz again with the same timings i have been running for a week or two now. TM5 is running now but showing no errors as of yet
 
You must log in or register to reply here.
Back
Top Bottom