DDR667 @ DDR800 Voltage increases

Soldato
Joined
22 May 2007
Posts
3,686
Location
UK
Is it just a case of upping the voltage from 1.8v to 2.1v in most cases. I`m getting Crucial (Micron) PC5300 and although my max overclock will probably be on the 333fsb I`d like to try 375fsb with PC5300 RAM. I`ve done a bit of reading and it seems you just have to increase the voltages to 2.1v.

Anyone doing this and has anyone ever killed a stick of RAM by doing this.
 
Its the "Vanilla" stuff CT2KIT12864AA667 so you reckon I`ll be able to run it at up to DDR800 speeds with only 1.8v but shouldn't worry about giving it 2.1v if I need too. Right thats sorted then.
 
Last edited:
I looked on the Crucial website and it doesn't give the timings only CAS5. Is 5-5-5-20 the exact timings or is it the slowest you can set which you would do if running at up to 800mhz seeing as its rated 667mhz @ CAS5.
 
Back
Top Bottom