deathadder mouse settings - what do you use

Don't touch any of those sensitivity settings!! Just set it to the middle setting in windows mouse settings with acceleration unticked :)
 
When I was really into CS 1.6, I used to update the firmware first, disable mouse acceleration in windows and also ran the regedit mouse accel fix. I think I then set the windows mouse sense to about half or just one notch past half way and that was perfect.

Mouse sense was edited further using the ingame console in CS.
 
Shame mine now double clicks the majority of the time and doesn't stay held down for dragging stuff etc :mad:
q7VSp.jpg.png
 
Set DPI and polling rate to the highest and lower the sensitivity slider until you feel comfortable, you have to give it a chance and get used to the higher sensitivity too, shouldn't take long.

7v5lr.png


That's mine but obviously you can't use those yet :p
 
Last edited:
Tombo said:
Set DPI and polling rate to the highest and lower the sensitivity slider until you feel comfortable, you have to give it a chance and get used to the higher sensitivity too, shouldn't take long.

7v5lr.png


That's mine but obviously you can't use those yet :p
Click to expand...

All the sliders Im same as rifleman, (note ADVANCED senstaivy x and y have those at 10 no matter what as your get the software screwing with your inputs else.) make sure windows is set to 6 for 1:1 inputs also

I use a polling of 500mhz the laser cannot do 1000hz consistent(from the info i have read, I could be proved wrong on this one),(if your usure what this does forgive my bad english but its update time on the laser.)

AFAIK the laser in the deathadder cannot hit 1000hz so you end up with figures like 990hz, 660hz 770hz 654 hz
And I find 1800dpi to be the best dpi on the deathadder. bf3 I play using 450dpi theres reasons for this, but thats another story.

Anotehr thing you may not no the double click slider, does nothing in games its not going to make you fire a 9mm any faster, again AFIK it only effects the desktop environment.
 
Last edited:
Accendo said:
If it's double clicking when you single click then you need to update the firmware.
Click to expand...

Nope that doesn't work anymore. I dropped it a few weeks ago and that fixed it for a while, now its back. It's intermittent though, like yesterday it wasn't bad at all. **** knows what's going on.
 
Spils said:
All the sliders Im same as rifleman, (note ADVANCED senstaivy x and y have those at 10 no matter what as your get the software screwing with your inputs else.) make sure windows is set to 6 for 1:1 inputs also

I use a polling of 500mhz the laser cannot do 1000hz consistent(from the info i have read, I could be proved wrong on this one),(if your usure what this does forgive my bad english but its update time on the laser.)

AFAIK the laser in the deathadder cannot hit 1000hz so you end up with figures like 990hz, 660hz 770hz 654 hz
And I find 1800dpi to be the best dpi on the deathadder. bf3 I play using 450dpi theres reasons for this, but thats another story.

Anotehr thing you may not no the double click slider, does nothing in games its not going to make you fire a 9mm any faster, again AFIK it only effects the desktop environment.
Click to expand...

the only game i play is bf3, so be interested to know about the 450dpi
 
Spils said:
AFAIK the laser in the deathadder cannot hit 1000hz so you end up with figures like 990hz, 660hz 770hz 654 hz
Click to expand...
It's not a laser but I did hear this too, couldn't find any concrete evidence on it though so I've left it the same.
 
I have the older Deathaddar 1800dpi, and I noticed the newer firmware updates are either 'DC' or 'NDC'.

As far as I can tell it refers to Drift control, anyone know if having it or not is better?
 
Skillmister said:
Nope that doesn't work anymore. I dropped it a few weeks ago and that fixed it for a while, now its back. It's intermittent though, like yesterday it wasn't bad at all. **** knows what's going on.
Click to expand...

Ah ok. Doing a quick Google search brings up the WD40 fix, seems you have to open it up and put some WD40 on it. If you Google it there is step by step intructions, it looks easy enough.
 
You must log in or register to reply here.
Back
Top Bottom