Decent Build without no Name.....Yet XD

SherlockHobz · 20 Sep 2014 at 23:49

So here is the build.

Main Componants:
Corsair 780t Case
Asus Rampage V Extreme X99
Intel 5930K Hex-Core
16GB Corsair DDR4 2800Mhz
EVGA GEFORCE GTX 780Ti SC
Palit GEFORCE GTX 780Ti
EVGA SuperNova P2 1000w
2* Samsung 240 Pro 256GB
3TB Seagate Barracuda

Cooling:
EK Supremacy EVO CSQ CPU Waterblock
2* EK 780Ti Water Bocks
2* EK 780Ti Backplates
EK D5-Vario X-Top Plexi
EK X3 250 Res
Alphacool ST30 360mm Rad
Alphacool UX45 240mm Rad
8* Corsair SP120 2450rpm Fans
2* Corsair SP120 White LED
Corsair AF140 1150rpm Fan
PrimoChill Rigid Acrylic Tubing Tubing 13/10mm
14* PrimoChill Revolver Fittings (Diamond Black) 13/10mm

Misc:
NZXT Sentry Mix 6-Channel Fan Controller
24" Asus VG248QE LED Monitor 144Hz

The EVGA 780Ti SC is pretty OLD and i can no longer find on so that is why i had to get a different make if anyone is wondering. Some items were placed into the case and can not be shown yet like the Controller and fans. If you have a build name plz tell me XD

SherlockHobz · 20 Sep 2014 at 23:53

Here is majority of the parts put in. Will do tubing and attatch wires tomorrow.

josh_king · 21 Sep 2014 at 09:44

you need to change a couple of things nothing major if not turned on, correct me if I am wrong but do you have all your fans sucking air from inside of the case out ? as in where is the new air to the case going to come from ? or are you leaving the side panel off ?

Pgreenwo · 21 Sep 2014 at 10:16

Really like this build. Itching to do a 780t build.
Josh is correct - I would flip the fan direction on the front 240.

Out of interest could you move that 240 rad using the top mount. Just wondering if there is clearance there??

SherlockHobz · 21 Sep 2014 at 23:24

josh_king said:
you need to change a couple of things nothing major if not turned on, correct me if I am wrong but do you have all your fans sucking air from inside of the case out ? as in where is the new air to the case going to come from ? or are you leaving the side panel off ?

The rads are pushing air out and pushing air in from the top and from the front on the otherside which is not visible. Is that still ok. I will also have another fan above the rad bringing air in.

Pgreenwo · 22 Sep 2014 at 17:54

air should go through rads in the same direction.

All the fans there are exhausting. sounds and looks like you have no airflow as the fans on the rads are working against each other.

josh_king · 22 Sep 2014 at 20:06

least I know I wasn't going nuts, but Pgreenwo is right, you need to have the fans so it makes a nice flow through your case, its normally done from bottom/front intake to rear/top exhaust. the front radiator itself doesn't need rotating just the fans.

if your unsure of the flow of which fans take, once unscrewed, look on the side of the fan it will show you the direction of air and rotation of the blades, hope this helps.

I love your build but would hate to see any damage to your components due to something silly like air flow

montymole · 22 Sep 2014 at 22:25

Yes you really need to change the direction of the Fans on the Front Rad So the air flows from font to back/top

jimbaw · 23 Sep 2014 at 10:48

this is quite promising. and as said above, check your fans

wrighty338 · 27 Sep 2014 at 12:10

Real nice, any more pics / progress? about to take the plunge and do one of these myself!

SherlockHobz · 28 Sep 2014 at 09:40

wrighty338 said:
Real nice, any more pics / progress? about to take the plunge and do one of these myself!

Yop just added sorted the tubing yesterday did leak test and everything and now its just running need to take that tube out.

Here are two latest images of the build that i have. Will show when its fully complete next week hopefully. Not the best tubing but eye level it looks good enough. First time doing acrylic and it took me 8 peices of tube (60cm each tube) just to do 3 of the bends.