DELETED_3139

[Biffa]

You are doing ok

If you want to maintain the CPU speed you are at, but increase the HT and RAM speeds you would need to drop the CPU multiplier and increase the FSB.

Or you could leave the multi as it is and just push the FSB a bit more to get the HT to 1Ghz and the mem closer to 1066

Try a 12 CPU multiplier and a 250Mhz FSB, just make sure you lock the PCi bus at 100Mhz

 

[Biffa]

I tend to leave the timings on auto if that settings is available and it slackens them off automatically. Then once I am stable I go back and try and push the timings as close to default as I can.