Soldato
- Joined
- 8 Sep 2003
- Posts
- 23,223
- Location
- Was 150 yds from OCUK - now 0.5 mile; they moved
switch on the case shorting out somewhere
DELETED_5350
- Thread starter DELETED_5350
- Start date
Check the BIOS, my board has the option to switch on after power fail, even though you have gone through the proper shut down procedure in windows.
I think my Dell 8300 done this.
Rob
Edit: read your post again might not be the above.
I think my Dell 8300 done this.
Rob
Edit: read your post again might not be the above.
Last edited:
Associate
- Joined
- 14 Aug 2004
- Posts
- 814
- Location
- Earth
I have read on another forum where the 4 pin connector to the motherboard was not plugged it and when he plugged in into the motherboard it fixed the same problem you have with booting and no display on the monitor.
Found this to be the cure for no display when I missed out the 4 pin connector but I never had it auto start up.
Anyway have a look and please post if this is the cause of the problem.
Found this to be the cure for no display when I missed out the 4 pin connector but I never had it auto start up.
Anyway have a look and please post if this is the cause of the problem.