Associate
- Joined
- 31 Aug 2007
- Posts
- 62
HI all. Im having problems bridging two DG834GTs using the latest DGteam firmware. Has anybody managed this?
- Im using 2 Netgear DG834GTs flashed with the latest DGTeam firmware (V1.03.22 build 1018)
- Both are set to the same channel and g mode only, same SSIDs, SSID is broadcast and no encryption (just for testing)
- Both have wireless bridging enabled and correct local and remote MAC addresses have been put in for both
- Both have DCHP disabled as i have a 3rd router doing that as it has the ADSL connection
- Both have IP address outside of the DCHPs range
- Have tried RIP enabled and disabled, no change
- Im using 2 Netgear DG834GTs flashed with the latest DGTeam firmware (V1.03.22 build 1018)
- Both are set to the same channel and g mode only, same SSIDs, SSID is broadcast and no encryption (just for testing)
- Both have wireless bridging enabled and correct local and remote MAC addresses have been put in for both
- Both have DCHP disabled as i have a 3rd router doing that as it has the ADSL connection
- Both have IP address outside of the DCHPs range
- Have tried RIP enabled and disabled, no change