Dillema

extrememachine · 19 Mar 2015 at 15:26

Just got 3 brand new gpu cards plugged every else in and my pc is still shutting down after turning it on 1 second.
Most definetly motherboard i presume.
So should i buy another x79 possibly Asus P9X79-E WS or go x99?

extrememachine · 19 Mar 2015 at 15:30

tried diferent psu if i remember still same issue

extrememachine · 19 Mar 2015 at 15:33

No need really but yes I have done

extrememachine · 19 Mar 2015 at 15:39

Just tried now with another psu same issue

extrememachine · 19 Mar 2015 at 15:40

snips86x said:
Have you tested each card individually?
What about each of the slots you're using. They been tested individually?

Yes I have tried diff slots, most probably the mobo now

extrememachine · 19 Mar 2015 at 15:42

Rested cmos, battery 2 same thing.
Could the onswitch for the chassis cause this issue?

extrememachine · 19 Mar 2015 at 15:45

It turns on for less than a second ,so no error posting

extrememachine · 19 Mar 2015 at 15:48

I have purchased the asus board TBH I have RMA'd the asrock one 4 times.

extrememachine · 19 Mar 2015 at 15:50

snips86x said:
ahh right, when was the PC last re-built? Was it before you added the new cards?

Yes.

Hope lady lucks on my side)

extrememachine · 19 Mar 2015 at 15:55

Ok thanks

extrememachine · 20 Mar 2015 at 19:16

Ok so I replaced the mobo and the quick swtiching power problem was eradicated.
Only thing is I cant get it to boot/
Looked at the error code and got 0C . The manual doesn't decipher this so I am stuck.

extrememachine · 20 Mar 2015 at 20:28

Most probably a need to BIOS FLash;Although I have found the Bios .CAP file and formated via FAT 32 but am unable to find the BRenamer tool, so I cant get the bios to flash properly via usb .

extrememachine · 21 Mar 2015 at 15:28

Update: Done the bios flash, nothing changed.
The pc powers on and stays on but no display not boot nothing.
Just got the p9 x79 e ws.
Any ideas?

extrememachine · 21 Mar 2015 at 16:21

The pc now can boot up according to the Q code thing but no display on monitor .
Can not try integrated graphics as I will have to access BIOS.
Unless there's a switch i dont know about.

extrememachine · 21 Mar 2015 at 17:07

Just got 3 titan b SC from evga's replacement,)