Does my overclock look ok?

mark1284 · 29 Mar 2013 at 11:01

Any advice really. Maybe push it abit more?

2hrs of prime 95

Just before passing the intel burn test on max

Thanks Mark

clayer · 29 Mar 2013 at 13:51

it looks fine to me and temps are good for ibt on max now test it for your everyday use ie gaming encoding etc.

good luck.

mark1284 · 29 Mar 2013 at 18:29

ok thanks

archerz · 29 Mar 2013 at 19:15

you could probably go a little higher. have you manually set your vcore?

wazza300 · 29 Mar 2013 at 19:46

vid 1.4061 :eek:

what amount of loadline calibration are you using?

mark1284 · 30 Mar 2013 at 18:28

yes mate vcore is manually set

loadline calibration is set to extreme.. would it be wise to lower it?

Drangueos · 1 Apr 2013 at 01:06

Because you set your vcore on manual, your VID voltage doesn't really matter, because the max voltage will be the one you manually set.

you can lower the loadline calibration, but because you are using manual voltage, nothing will change, psychologically I feel better seeing lower voltages

wazza300 · 1 Apr 2013 at 01:10

it just seems high for 4.3ghz 1.4v?

how much voltage does it use under full 100% load?

if I were you id use high llc and maybe +0.020 or +0.025v cpu offset(maybe more you would need to test for stability),enable all power saving

then cpu will clock to full clocks at load and downclock itself at idle,in speed and voltages

Drangueos · 1 Apr 2013 at 01:30

looks like his max voltage is 1.288V

mark1284 · 1 Apr 2013 at 18:37

4.5ghz overclock 1.3vcore
Screenshot was took after 8 hours of prime
Only seems to shoot to 1.4vid when I use intel burntest

wazza300 · 1 Apr 2013 at 20:03

you need to lower llc then or cpu offset,it should go to around 1.3-1.35v at full ibt load

1.4v is too much for 4.5ghz imo

mark1284 · 2 Apr 2013 at 19:21

ok thanks