Does these look right?

Raymond Lin · 20 Feb 2007 at 12:24

Just went from 1G to 2G.

Had 1 pair of 512 x 2 of Geil PC3500, added another 2 sticks of OCZ PC3200 (with a better timing). Checked CPU-Z, notice performance mode is not running? And the OCZ is on 166mhz/200mhz??

Just wondering is it normal? It is on a P4 3.2 Northwood/P4C800-E motherboard.

steve258 · 20 Feb 2007 at 14:03

Often happens when you have all 4 sticks occupied or have mixed brands.

Doesn't mean it won't run 200Mhz though, so I'd try manually setting memory speed to 200Mhz in BIOS and set timings to 2/3/3/6 matching the slower Geil sticks.

Raymond Lin · 20 Feb 2007 at 14:46

I am wondering if i am reading it right, is it running at Geil speed? As in 200mhz? I am confused as it is showing 166mhz and 200mhz.

If they are both running at 200mhz then i am happy with that.

Raymond Lin · 20 Feb 2007 at 15:37

Just wondering where is it in here do you make the CPU/FSB to 1:1 ?

steve258 · 20 Feb 2007 at 19:51

The memory speed settings is not in there, it should be under the "Jumper Free Configuration".

Your memory is running at 166Mhz. The page where it shows both 166 / 200 is to show you the default SPD timings at relative speed and not the actual speed it is running at.

Raymond Lin · 20 Feb 2007 at 23:21

Found it.

Actually got it running at 2.5-3-3-7 now as well for the last 7 hours with no problems.